Listing ID #1635147
Company Information
Ask for more detail from the seller
Contact SupplierSipcolite Knifing Putty
ü a high durability soft cut metal putty
ü applied by mixing with whiting or chalk powder in the maximum permissible ratio of 10:7 (Putty:Whiting)
ü air drying or stoved
ü butter like consistency
ü does not affect the gloss or other properties of finishing coat enamel applied over it.
ü recommended for use on Metallic Surfacers, for filling of dents, and other surface defects.
|
: Ferrous Metal. |
|
: Knifing. |
|
: Grey |
|
: Smooth Paste |
|
:Surface dry-less than 30 minutes. |
|
: Smooth and matt. |
|
:Mineral Turpentine oil |
|
:Sand the surface with Emery paper No. 180. Apply a coat of suitable primer (Sipcolite White Primer for wood, Sipcolite R.P.5 for metallic) depending on the surface of application and allow it to dry for 6-8 Hrs. Apply the putty with a putty knife, filling deep dents with thin layers of the paste. Allow a drying time of 6-8 hrs between coats. Apply a coat of primer before application of finish coats. |