100-200kg Horizontal Autoclave, For Hospital, Laboratory, Pharma Industry

Based on the latest microbiological and sterilizing principle, the Horizontal Autoclave, which we offer, is appreciated by the clients for its smooth functioning, high safety and low maintenance cost. These Horizontal Autoclaves are tested against varied quality parameters prior to delivering them to the clients. We are Baddi (Himachal Pradesh) based Manufacturer, Supplier and Exporter of Horizontal Autoclave.
Why Our Horizontal Autoclave?

• Economically of obtains all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical institute
• Suitable for sterilizing hospital dressings, linen, rubber plastic goods, surgical instruments, Glassware, utensil, etc.
• Construction Robust and rugged
• The Horizontal Autoclave is based on the principle that microbiological action of saturated steam at elevated temp is rapid and thorough
• These Horizontal Autoclaves on downward displacement of air principle
• Weld construction makes it leak proof unlike riveted construction
• This device protects the heater in the generator from burning out dry.
• The steam pressure in the boiler is indicated on an individual pressure gauge.
• Safety Lock for Door Every horizontal rectangular sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure
• By a pressure control switch which automatically limits the pressure to the required set valve.
• A dead weight safety valve at chamber level
• Customized solutions
• We can manufacture the same as per sizes required by the customers.
• This item is also on DGS&D Rate Contract.
• Two spring loaded safety valves one each at chamber and boiler level.

Construction : All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure Inner chamber is made of thick plate of Mild Steel of nonmagnetic stainless steel of 304/316 quality and jacket is made out of rolled steel. Sterilizers will have single door made out of rolled steel lined with S.S. sheet on both sides. The steam jacket is lined on the outer side with asbestos sheet or glass wool which prevents heat loss due to radiation and is covered by strong rolled steel sheet duly painted. Boiler made of thick stainless steel plate is suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. The Horizontal Autoclaves come fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. Two speeds of exhaust are available for evacuating. The Chamber Two separate valves are provided for evacuating air and steam from inner chamber and jacket as and when desired. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically. Switch Box consists of the Pressure control switch, Main switch, Pilot lamps, relays etc. and is mounted on the stand of the sterilizer for easy operation.
Operations : The clutch mechanism automatically disengages the threads of the radial locking system for precluding any eventuality of accident when the chamber is under pressure. A heat resistant Neoprene Rubber gasket ensure steam tight fitting. Pressure Control Electrically operated Dan Foss (Pressure Control Device) is incorporated in all electrically operated sterilizers. It economizes power consumption and limits the use of release valve which would frequently blow steam into the room. It cuts off the power supply to heaters when the set pressure is achieved and re-energizes heaters when pressure falls down. The complete sterilizing cycle is controlled from one point with the help of �Multi port valve� fitted at front top.
The sterilizer is provided with triple safety :

• By a pressure control switch which automatically limits the pressure to the required set valve
• Two spring loaded safety valves one each at chamber and boiler level
• A dead weight safety valve at chamber level

Plug Screen :

• Prevents the discharge line from choking. The plug is easily removable for routing cleaning
• A powerful Ejector (for drying sterilized linen) circulates air through the chamber
• The circulating air passes through a corrosion resistant metal wool filter
• A Dial thermometer is provided to show the chamber temperature
• Automatic Vacuum Breaker is provided to break vacuum case of vacuum formation due to steam condensation

Operating Tempertaure and Pressure :

• Sterilizing Temp : 121^oC
• Sterilizing Pressure : 1.2 to 1.5 kg/Cm2, (15 psi to 22 psi)

Optional Accessories :

• Chamber/Jacket of S.S. 316
• Door of S.S. 304/316
• Additional Tray/Shelves
• Carriage & Trolley
• Direct steam supply from centralized boiler
• Temperature recorder
• High pressure High vacuum model
• Additional door (Double door) model
• Fully automatic micro processor controlled model Spare Accessories
• Pressure gauge/Compound gauge
• Water level gauge glass
• Dial thermometer
• Non return valve
• Moisture trap
• Joint less Gasket : Neoprene/silicon rubber (Size - 400 & 500mm)
• Heating elements (Flange Type) Rating kw 6.0, 9.0 Available in following capacities W H D load (a) 600 mm ½ 600 mm ½ 1200 mm 18 kw Electrically Operated (b) 600 ½ 900 ½ 1500