Resin Based Curing Compound, For Construction, Color : Grey

RESIN BASED CURING COMPOUND
DESCRIPTION
Perma Resi Cure is a resin based curing compound supplied in clear straw colored liquid form. When applied on a fresh concrete surfaces, it forms a seamless film which does not allow the water to escape or evaporate from  the surface so that the water in concrete/mortar  is utilized for self curing or full hydration of cement. This continuous  film further dries to form a membrane which protects the concrete and increases its durability and prevents from shrinkage cracks.
PRIMARY USE

• Perma Resi Cure is ideally suited for all concrete or mortar  curing applications where water scarcity exists or where effective curing is unpractical due to location disadvantage, accessibility problems, ineffective supervision etc.
• Perma Resi Cure helps concrete achieve 90% or higher curing efficiency and hence helps in development of full strength.
• Perma Resi Cure is ideal for curing soffit of slabs or beams where in water curing is difficult.
• Perma Resi Cure advantageous in curing of repair works, and small areas of concreting or mortar laying where the full curing becomes doubtful because of impractability of keeping workers for curing exclusively.

ADVANTAGES

• Perma Resi Cure improves the curing process of concrete/mortar , by enhancing the hydration of cement which results in more durable concrete or mortar.
• Perma Resi Cure improves the surface quality by the control of moisture on the surface.
• Perma Resi Cure protects the treated surface by minimizing the potential for shrinkage cracks.
• Perma Resi Cure makes the treated surface hard wearing and dustproof.
• Perma Resi Cure is spray applied and hence cost effective and eliminates the repetitive water curing system.

DIRECTION FOR USE

Perma Resi Cure can be spray applied on to the concreted or repaired surface just when the surface moisture has dried. Perma Resi Cure shall not be sprayed on to the bleed water of fresh concrete, this will hinder the curing film formation. On the de-shuttered concrete surfaces the curing compound may be sprayed immediately after de-shuttering. After application of Perma Cure, foot traffic shall not be allowed on it till it is fully dry, otherwise the foot traffic will damage the curing film and effective curing will not be achieved. Perma Resi Cure is a solvent based  product product hence care should be taken wduring application. The product should be kept away from sources of fire. During application workers should be restrained from smoking.

PACKING AND STORAGE
Perma Resi Cure is available in 5 Liter 20 Liter and 200 Liter metal drums. Perma Resi Cure should be stored in a cool and dry place away from any source of fire between temperatures 10OC  to 25OC