heavy duty, multipurpose extreme pressure grease containing mos2 solid lubricant
features

\n

\n
• extremely wide service temperature range of -20°c to +180°c
\n
• forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
\n
• prevents metal-to-metal contact, reduces friction, wear & protects against fretting corrosion
\n
• highly resistant to hot or cold water and water washout
\n
• extends relubrication intervals and cuts down lubricant consumption
\n
• combination of ep additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication
\n
• offers good surface protection and corrosion inhibiting properties
\n
• very good performance under moderate to high loads and medium speeds under reciprocating motions
\n
• makes sliding smoother and reduces operational noise
\n
• increases wear life of the equipment & out performs conventional lubricants
\n
• good resistance to oxidation applications
\n
• use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
\n
• for heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery.
\n
• for long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.
\n

\n

applications

\n

\n
• use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
\n
• for heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery.
\n
• for long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to
\n
• severe impact loads and slow operating speeds.
\n

\n

method of application
apply on all clean sliding surfaces by normal greasing methods i.e. By brush, grease gun or dispense via centralized lubrication systems. Do not mix with other oils or grease.

heavy duty, multipurpose extreme pressure grease containing mos2 solid lubricant
features

\n

\n
• extremely wide service temperature range of -20°c to +180°c
\n
• forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
\n
• prevents metal-to-metal contact, reduces friction, wear & protects against fretting corrosion
\n
• highly resistant to hot or cold water and water washout
\n
• extends relubrication intervals and cuts down lubricant consumption
\n
• combination of ep additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication
\n
• offers good surface protection and corrosion inhibiting properties
\n
• very good performance under moderate to high loads and medium speeds under reciprocating motions
\n
• makes sliding smoother and reduces operational noise
\n
• increases wear life of the equipment & out performs conventional lubricants
\n
• good resistance to oxidation applications
\n
• use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
\n
• for heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery.
\n
• for long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.
\n

\n

applications

\n

\n
• use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
\n
• for heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery.
\n
• for long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to
\n
• severe impact loads and slow operating speeds.
\n

\n

method of application
apply on all clean sliding surfaces by normal greasing methods i.e. By brush, grease gun or dispense via centralized lubrication systems. Do not mix with other oils or grease.