ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment

Product Description

Programmable Spraying Used Salt Spray Test Equipment is designed with wide application to test corrosion resistance performances for surface treatment for various materials that includes Paint, electroplating, organic and inorganic coating process, anode process, anti-rust oil etc.

Standard Compliance-  ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment

ASTM B117 Salt Spray(Fog) Test

ASTN D1654 Standard Test Method For Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

ASTM D3359 Standard Test Methods for Measuring Adhesion By Tape Test

JIS H8502 Methods of Corrosion Resistance Test For Metallic Coatings

IEC 60068-2-11-1981 Basic Environmental Testing Procedures Part 2: Tests, Test Ka: Salt Mist

IEC6802-52 1996 Environmental Testing-Part 2: Tests-Test Kb: Salt mist, cyclic (Sodium Chloride Solution)

GJB 150.11A-2009 Laboratory Environmental Test Methods For Military Material- Part 11: Salt Fog Test

CNS 4159 CASS Test-Copper Accelerated Acetic Acetic Acid Salt Spray (Fog) Test

CNS 4158 Method of Salt Spray Fog Test for Surface Finishing

MIL-STD810F Environmental Engineering Considerations and Laboratory Tests

MIL-STD 202 Test Method Standard: Electronic and Electrical Component Parts

MIL-STD 883 Test Method Standard: Microcircuits

MIL-STD 1344 Test Methods For Electrical Connector

SH - 90  ( 270L)

Internal Dimension (mm):W900xH500xD600;

External dimension (mm):W1400xH1200xD900

Material：

1.Test chamber material :PVC board

2.The chamber sealed by impact-resistany acrylic board.

3.Saturated air barrels：SUS304 stainless steel(excellent high temperature& high pressure resistant performance)

Constant temperature control settable：

(A)Salt Spray Test: NSS,ACSS

   1.testing zone temperature : 35℃（+/-）2℃

   2.Saturated air barrels temperature : 47℃（+/-）2℃

(B)Corrission resistance test:

   1.Laboratory: 50℃（+/-）2℃

   2.Saturated air barrels: 63℃（+/-）2℃

Packaging & Shipping

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment is our star products , and we had obtained the CE certification for this machine .

ASLi main test equipments:

Environmental chambers, temperature (humidity) chamber,Thermal shock chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber,etc

ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment

Product Description

Programmable Spraying Used Salt Spray Test Equipment is designed with wide application to test corrosion resistance performances for surface treatment for various materials that includes Paint, electroplating, organic and inorganic coating process, anode process, anti-rust oil etc.

Standard Compliance-  ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment

ASTM B117 Salt Spray(Fog) Test

ASTN D1654 Standard Test Method For Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

ASTM D3359 Standard Test Methods for Measuring Adhesion By Tape Test

JIS H8502 Methods of Corrosion Resistance Test For Metallic Coatings

IEC 60068-2-11-1981 Basic Environmental Testing Procedures Part 2: Tests, Test Ka: Salt Mist

IEC6802-52 1996 Environmental Testing-Part 2: Tests-Test Kb: Salt mist, cyclic (Sodium Chloride Solution)

GJB 150.11A-2009 Laboratory Environmental Test Methods For Military Material- Part 11: Salt Fog Test

CNS 4159 CASS Test-Copper Accelerated Acetic Acetic Acid Salt Spray (Fog) Test

CNS 4158 Method of Salt Spray Fog Test for Surface Finishing

MIL-STD810F Environmental Engineering Considerations and Laboratory Tests

MIL-STD 202 Test Method Standard: Electronic and Electrical Component Parts

MIL-STD 883 Test Method Standard: Microcircuits

MIL-STD 1344 Test Methods For Electrical Connector

SH - 90  ( 270L)

Internal Dimension (mm):W900xH500xD600;

External dimension (mm):W1400xH1200xD900

Material：

1.Test chamber material :PVC board

2.The chamber sealed by impact-resistany acrylic board.

3.Saturated air barrels：SUS304 stainless steel(excellent high temperature& high pressure resistant performance)

Constant temperature control settable：

(A)Salt Spray Test: NSS,ACSS

   1.testing zone temperature : 35℃（+/-）2℃

   2.Saturated air barrels temperature : 47℃（+/-）2℃

(B)Corrission resistance test:

   1.Laboratory: 50℃（+/-）2℃

   2.Saturated air barrels: 63℃（+/-）2℃

Packaging & Shipping

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. ASTM B117 Standard Programmable Spraying Used Salt Spray Test Equipment is our star products , and we had obtained the CE certification for this machine .

ASLi main test equipments:

Environmental chambers, temperature (humidity) chamber,Thermal shock chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber,etc