Graphic Display Weighing Controller

Listing ID #4094088

Get Latest Price

Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

F805A adopts a color LCD touch panel which enables simple and comfortable operation by greatly enhancing the visibility of weight display, various setting values display and status display. It....

View More Details

Send Enquiry

Product Details

F805A adopts a color LCD touch panel which enables simple and comfortable operation by greatly enhancing the visibility of weight display, various setting values display and status display. It provides high-speed A/D conversion and digital processing capability at an operating speed of 1000 times/sec There are substantial interfaces that allow direct connection to major PLCs including OMRON DeviceNet and MITSUBISHI CC-Link. F805A, which was developed specifically for weighing systems, is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line loadcell controller.

Specifications

ANALOG SECTION
Excitation voltage	10V or 5V DC±5% (digital adjustment), Output current; within 120mA, remote sense type (Up to 4 loadcells at 350O are parallel-connectable.)
Zero adjustment range	0 - approx. 2mV/V (digital adjustment)
Gain adjustment range	0.3 - 2.0mV/V (digital adjustment)
Min. input sensitivity	0.3µV / count (at valid 1/4 scale division), 0.075µV / count (at invalid 1/4 scale division)
Accuracy	Non-linearity: within 0.01% FS (Typ: 0.005% FS at room temperature) Zero drift: within 0.1µV/°C RTI (Typ: 0.08µV/°C) Gain drift: within 15 ppm/°C (Typ: 5 ppm/°C) Noise: within 0.1µVp-p RTI (0.1 - 10 Hz)
Analog filter	Bessel low-pass filter (-12dB / oct.) selectable from 2, 4, 6, 8 Hz
A/D converter	Speed: 1000 times/sec (switchable to 200 times/sec) Resolution: 16 bit (binary)
Min. display resolution	1/10000 (at valid 1/4 scale division), 1/40000 (at invalid 1/4 scale division)
Secondary calibration	Equivalent input calibration method that allows calibration by simply key-inputting the rated value of a sensor without applying an actual load Min. calibration resolution at secondary calibration (1/1000 at room temperature)

SETTING SECTION
Setting method	?Setting by touch panel operation ?Setting from host computer via RS-232C is also possible.
Setting value storage	?Default: NOV RAM (nonvolatile RAM) ?Other setting values: C-MOS RAM with backup of a lithium battery (Depends on usage conditions and storing environment, but memory can be kept for approx. 7 years or more.)
Setting value protection	Setting operation can be locked to prevent unauthorized modifications of default values and calibration by malfunction (LOCK)

INPUT / OUPUT SECTION
External signal output	- Logic: Transistor’s open collector output (Emitter = COM terminal); Output is LO when transistor is ON. - Near zero, SP1, SP2, SP3, Under, go, over, comp, discharge, Low limit, high limit, stable, weight alarm, error, final error, run or total limit External signal input
External signal input	- Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.). - Gross / Net weight change, Digital zero, Tare off, Tare reset, Hold or judge, Feed / discharge change, Accumulation command, Accumulation clear, Start, Stop, Discharge command, Code No. designation, Forced-discharge command, Discharge gate open, Discharge gate close, Code No. designation selection, Graph drawing
Weighing code selection input	BCD 2 digits (00 - 99), 100 codes
Interface	ï½¥ SIF:2-wire type serial interface (standard); Interface to link with Unipulse printer or external display ï½¥ SI2:2-wire type bi-directional serial interface (standard): Interface to link with peripherals such as a printer or display ï½¥ 232:RS-232C communication interface (standard): Write (change) / read weight data, various statuses and setting values via commands from host computer ï½¥ BCO:BCD parallel data output interface (Optional): Parallel interface to transmit weight data to various peripherals ï½¥ BCI:BCD parallel data input interface (Optional): Parallel interface to receive various setting values from external unit ï½¥ 485:RS-485 communication interface (Optional): Allows longer-distance communication than RS-232C. ID numbers are set, and multiple units of F805A are parallel-connectable. ï½¥ DAC:D/A converter interface (Optional): Interface to convert weight data to current signal and output it ï½¥ CCL:CC-Link interface (Optional): Interface to link F805A with network such as MITSUBISHI general-purpose sequencer ï½¥ ODN:DeviceNet interface (Optional): Interface to link F805A with DeviceNet such as OMRON CompoBus/D

DISPLAY SECTION
Display	STN color LCD (Display area 117.2 (W) x 88.4 (H) [mm], 320 x 240 dot
Weight value display	5 digits, Minus sign on most significant digit.
Unit	Selectable from t, kg, g, N, lb, none
Decimal point	Selectable 0. 0.0, 0.00, 0.000
Display update rate	Selectable from 3, 6, 13, 25 times/sec (A/D conversion rate is fixed.)
Scale capacity	5-digit numerical values (up to 99999)
Over display	LOAD (A/D converter input over), OFL1; (Net weight > Net over set value) [5-digit setting], OFL2: (Gross weight >Capacity +9 scale divisions). OFL3; Gross weight > Gross over set value (5-digit setting)
Center zero	True zero point (0±1/4 scale) or the center of each value is displayed.
Status display	LOCK, HOLD, ZALM, STAB, TARE, RUN, HI, LO, NZ, SP1, SP2, SP3, OVER, GO, UNDER, COMPL, DCHG
Set value display	CODE, FINAL, OVER, UNDER, BEFORE FINAL, FF
Accumulation display	Accumulation times (4 digits), Accumulation value (9 digits)
No. display	Alarm No. (2 digits): Error No. in sequence control Sequence No. (3 digits): Process No. in sequence control

GENERAL SPECIFICATIONS
Excitation voltage	100 - 240V AC (+10% - 15%) (Free power supply 50/60 Hz) 12 - 24V DC (±15%) (Please specify when ordering)
Power consumption	20W
Inrush current (Type)	15A, 5msec: 100V AC average load condition (cold start at room temperature) 30A, 5msec: 200V AC average load condition (cold start at room temperature) 10A, 0.5msec: 12V DC average load condition (cold start at room temperature) 35A, 0.4msec: 24V DC average load condition (cold start at room temperature)
Operating conditions	Temperature: Operating temperature range 0 - +40°C; Storage temperature range -20 - +60°C Humidity: within 85% RH (no condensing)
External dimensions	174 (W) x 135 (H) x 159 (D) mm (protruding part not included)
Panel cutout dimensions	165 (W) (+2 - 0) x 130 (D) [mm]
Panel thickness	1.6 - 3.2 mm
Weight	Approx. 2.3 kg
CE marking receiving	EN61326-1 (class A), EN61010-1 (Please specify requirement for CE marking certified product when making your order) (DC power supply is not certificationed to CE Marking. )

OPTION
BCO	BCD parallel data output interface
BCI	BCD parallel data input interface
DAC	D/A converter interface (2ch interface installed)
485	RS-485 communication interface*
ODN	DeviceNet interface*
CCL	CC-Link interface*
Number of option installations	Up to 4 options and 1 serial communication interface are available. (With*, only 1 option is available.)

Company Details

We would like to introduce our company having team of technocrats. Our team is led by engineers having 15-16 years of experience of supply & service in weighing industry , packing machines , Automatic machines , cement packing plants with various manufacturers of India & abroad. They ably guide us in selecting & manufacturing products that can meet latest industrial standards. With extensive experience in field services further allows us to deliver products with customized changes as per specific demands at client end.
We would like to proudly announce that we are dealers & distributors of UNIPULSE Japan products for sales & service in India. UNIPULSE-Japan The Unipulse Weighing Controllers & Indicators are adaptable to a wide range of weighing applications. They offer PRECISE MEASUREMENT AND CONTROL of Hopper Scales, Packing Scales, Checkweighing Scales, packer and Batching Systems. These controllers are extensively used for packing machines for Rice, sugar, talc, chemical, silica, plaster, cement etc. High speed A/D conversion rates provide TOP SPEED and ACCURACY for weighing application. Unique display contents, specific to the appropriate application, provide an excellent MMI (HMI) embedded interface. Various communication protocols, such as SI/FII, RS230C, RS485 or CC Link enable users to build up sophisticated weighing systems within a PC/PLC overall-controlled system.
Our manufacturing range of products parts consists of Packing plant for Cement with our own core products like Rotopackers for Valve sacks, Impeller packers for cement, Truck & wagon loaders, Cement bag counter, Counter for truck loader & wagon loader, Big bag filling & emptying etc.
We have availably of special spare parts for packing plant machineries like ROTOPACKER, loaders with better life cycle. We offer services for packing machines and with experience we suggest right upgrading in machines to meet demands of users for latest technology at reasonable prices. In some products we are comparable & better than even OEM as our profit targets are not bigger.
Our automation solutions are used for Dispatch monitoring system comprises of Bag counters are widely used by cement Industry in India.
Our Indian customers includes Ultratech Cement, Holcim Cement, JP Cement, AMBUJA Cement, ACC Cement, India Cement, Madras Cement and other reputed plants.
We have been striving for excellence in field of packing by providing products, step ahead and cost effective integrated automation solutions consisting of mechanical, electrical & electronic fields. With tie up with some of base manufacturers we are able to achieve ourselves as solution provider too.
Our commitment to really understand your needs is an obsession in the end, keeping you delighted with our products, service and support is what’s important. Our focus will remain to give you what you want & make life simple.