Globe Valves

Application

Globe Valves are compatible with all CFC, HCFC and HFC Refrigerants and oils and other Industrial gases / fluids non-corrosive to Steel and Brass. (With suitable Seal Material).

Construction

• Valve Body: Hot Forged Brass (BS-218).
• Valve Bonnet: Hot Forged Brass (BS-218).
• Spindle: SS 304.
• Gland Nut: Extruded brass.
• Stem packing: Neoprene rubber and Asbestos Free gasket.
• Seat: P.T.F.E.
• Bonnet cap: Electroplated MS.

Design

• The Valve is designed with large orifice and integrally forged flow path offering very low frictional resistance, ensuring maximum flow rate and minimal pressure drop.
• Internal back seating enables replacement of the spindle seal whilst the valve is active, i.e. under pressure

Operation & Testing.

• Maximum working pressure with flow in direction of Arrow mark 400 psig.
• Working Temperature Range : (-30°C + 100°C).
• Individual pneumatic Testing in Open/Close position at 400 psig.

Installation for Solder connection

• While brazing solder connection, disassemble the Valve and use suitable filler material for brazing.
• While re-assembling the Valve allow the Valve body to cool to room temperature and clean the part thoroughly. For leak tight sealing use Torque wrench set at correct load to avoid damage to the Seal and Valve.