Listing ID #3900957
Company Information
Ask for more detail from the seller
Contact SupplierA fume hood or fume cupboard is typically protect only the user, and are most commonly used in laboratories where hazardous or noxious chemicals are released during testing, research, development or teaching. They are also used in industrial applications or other activities where hazardous or noxious vapors, gases or dusts are generated or released.
A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height, Because one side (the front) of a fume hood is open to the room occupied by the user, and the air within the fume hood is potentially contaminated, the proper flow of air from the room into the hood is critical to its function. Much of fume hood design and operation is focused on maximizing the proper containment of the air and fumes within the fume hood
Fume exhausts hoods manufactured by us as per customer requirements.
The inner wall of the working chamber is covered with epoxy coated or FRP
lining or as required. The working table is made of acid proof 6mm thick FRP/18mm thick Granite and provided with gas/air Petcocks and additional power points, diffused fluorescent tubes.
The front shutter is of shatter proof clear glass/poly carbonate sheet, framed in suitable structure with vertically sliding facility and is connected with counter weight balancing arrangement.
Fume exhaust hoods are provided with suitable ducting of FRP or PVC material with required diameter, two main types exist, ducted and recirculating (ductless). The principle is the same for both types: air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room.
The exhaust system consists of a dynamically balanced centrifugal impeller, made of PVC/Aluminum, directly coupled with a industrial blower of 1440 RPM 1Phase or 3 phase 230/415 V and controlled by a DOL starter.
Sterile Tech Model Number | SFH 322 | SFH 422 | SFH 533 | SFH 633 |
Working Size (W x D x H)Ft | 3’xD2’x2’ | 4’x2’x2’ | 5’x3’x3’ | 6’x3’x3’ |