Food Grade Epoxy Paints

Listing ID #942477

Avail from us Food Grade Epoxy Paints that have low viscosity. The Food Grade Epoxy Paints result in 100% volume solids epoxy coating. Our specially formulated Food Grade Epoxy Paints comply with SSPC paint 42 specification. They are applicable over variety of substrates including Aluminum, Concrete, Glass, FRP, GRP etc.
When used as part of approved scheme, this material has following certifications

• Food Contact  -  Carriage of Grains ( NOHA )
• Food Contact   - FDA Compliant : Dry Foodstuffs
• Tested for non-contaminations of grain cargo  at the
• Newcastle Occupational Health, Great Britain

Theoretical Spreading Rates

• 3.9 m²/litre - 200 micron 3.9 m²/litre - 200 micron
• 154 sq.ft./US gallon - 8 mils 154 sq.ft./US gallon - 8 mils
• Flash point : 35°C/95°F 35°C/95°F

Introduction to Food Grade Epoxy

• A low viscosity,  100% volume solids epoxy coating
• Compliant with SSPC paint 42 specification
• Applicable over variety of substrates including Aluminum, Concrete, Glass, FRP, GRP etc.
• Flexibility in application – can be applied directly over tightly adherent rust, old coating, oily, condensed & splash zone surface. Can be used underwater for wrapping of piling, jacket legs & variety of substrates

Properties of Food Grade Epoxy

• 100% Solid Epoxy Coating
• '0' Volatile Organic Compound
• Food-grade certified
• '0' Flame spread
• Applicable directly on difficult surfaces, viz. Stainless Steel, Aluminum, Galvanized Iron etc.

Examples of Applications

• As a protective coating for structures in harsh environment
• Condensation structure / piping
• Online high heat application (≤ 150°C)
• Underwater piling, jacket legs, risers
• GRE/GRP piping
• FRP strengthening
• As a Metal Filling Compound (MFC) (≤5mm)
• Oily bilge wells / pump rooms / engine room
• Concrete & concrete repairs
• As a floor-coating – also for "Clean Room" applications

"Happy to inform you that we stock and trade in this Food Grade Epoxy Paints, we have observed visually and found satisfactory paint which was applied on condensate surface lines at our premises”
Food Grade Epoxy Paints – an innovative 100% solid multipurpose epoxy coating :

• Meets & exceeds the requirements enlisted in SSPC Paint 42 specification
• 100% solid epoxy – no solvents added – “0” VOC
• Specially formulated for multipurpose use in offshore environment
• No stringent requirements for surface preparation – can be applied on tightly adherent rust
• Equally good performance even when applied on oily or damp surfaces
• Applicable directly underwater without any modifications
• Can be used along with wrapping tapes underwater for extra protection to risers, piling, structure etc.
• Along with Zirconium (added externally), can be used as a Metal Filling Compound
• Food grade coating – DNV certified – applicable for internal lining of Potable water tank
• Class “0” rated fire retardant

Applications

• Crude, product & potable water storage tank linings
• Ballast tank coating where surface preparation may be an issue
• Bilges, pump rooms etc. where there is a high possibility of oily substrate
• High temperature application (up to 150 deg. C)
• Engine shell coating
• Sweating lines – can be applied directly without shutdown
• Risers, jackets, piling – for underwater application
• GRE & FRP repairs & restoration
• Self-levelling floor coating – Sterile grade