Fly Ash Bricks

We are offering fly ash bricks/blocks/tiles. Fly ash brick (fab) is a building material, specifically masonry units, containing class c fly ash and water. Compressed at 28 mpa (272 atm) and cured for 24 hours in a 66 °c steam bath, then toughened with an air entrainment agent, the bricks last for more than 100 freeze-thaw cycles. Owing to the high concentration of calcium oxide in class c fly ash, the brick is described as "self-cementing". The manufacturing method saves energy, reduces mercury pollution, and costs 20% less than traditional clay brick manufacturing.
Fly ash bricks are lighter than clay bricks.
Advantages
1.due to high strength, practically no breakage during transport and use.
2.due to uniform size of bricks mortar required for joints and plaster reduces almost by 50%.
3.due to lower water penetration seepage of water through bricks is considerably reduced.
4.gypsum plaster (plaster of paris) can be directly applied on these bricks without a backing coat of lime plaster.
5.these bricks do not require soaking in water for 24 hours. Sprinkling of water before use is enough.
Dry fly ash bricks meet the requirement specified is 3812 2003 and is suitable for fly ash limecement bricks manufacturing as per is 12894: 2003