Flux De-Coating Machine

in order to ensure zero defects at buyer's end, we make sure that we conduct stringent quality procedures. we keep the globally accepted packaging guidelines in consideration so that the products that we deliver are packed well and are safe from the external environmental factors such as shock, compression, temperature.

main features :

• the machine is robust and does not require foundation.

• the system have twin set of machines. main machine :

• 1. de-coating m/c - de-coat the electrode and

•   cleaning m/c - clean the wire.

• the machine is maintenance free.

• de-coating machine fitted with two hp motor with high ratio gear box and cleaning machine fitted with one hp motor with high ratio gear box.

• the electrode loaded in the hoper and pick-up roller, picks-up electrode one -by- one and send to the de-coating station. at de-coating station it de-coat the electrode at the faster rate and it is a continues process. after de-coating the wire claimed is with a fine layer of flux and need to clean.

• the cleaning machine cleans the wire and it can be re-usable for production.

• the flux reclaimed from de-coating can also be reused.

• the machine can be used for de-coating of the wet electrodes. however the wet electrodes should be kept for 3-4 hours to dry naturally.

• the wastage may be almost negligible.

• de-coating machine weight 300 to 350 kgs., length 1000mm, width 800 mm, height 900mm (approx.)