"MYMIX ‐ FTA (Floor Tile Adhesive)" is a thin set Cementitious dry mix mortar For installing Ceramic, Vitrified tiles and natural stones for interior floor applications.

"MYMIX ‐ FTA" is polymer modified tile adhesive which make it ideal for fixing tiles, natural stones and granite to most building substrates.

• Specially for interior floors and walls
• Small and medium size tiles fixing
• For Internal use and External use

• Easy to Apply, single component adhesive
• Extended open time
• Superior adhesion properties with adhesion to varies substrates

• Concrete wall and floor area
• Tile - on - tile aplication
• Cement mortar beds

• Dual purpose for floor and wall with good adhesion workability
• Suitable for solid subfloors

• Thin - set cementitious screeds
• Cement Plaster

• 25 kg. Project packing of 40 kg size is available on demand

• Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area

• Add 25 kg of “MYMIX‐FTA (Floor Tile Adhesive)” to approx. 6.5 litres. To 7.5 litres. Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture
• After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel
• Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints
• The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential that you waterproof wet areas prior to tiling.
• New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling.
• Under normal circumstances, i.e. a temperature of 20° C and a relative humidity of 65%, the joints may be filled after minimum 24 hours.

"MYMIX ‐ FTA (Floor Tile Adhesive)" is a thin set Cementitious dry mix mortar For installing Ceramic, Vitrified tiles and natural stones for interior floor applications.

"MYMIX ‐ FTA" is polymer modified tile adhesive which make it ideal for fixing tiles, natural stones and granite to most building substrates.

• Specially for interior floors and walls
• Small and medium size tiles fixing
• For Internal use and External use

• Easy to Apply, single component adhesive
• Extended open time
• Superior adhesion properties with adhesion to varies substrates

• Concrete wall and floor area
• Tile - on - tile aplication
• Cement mortar beds

• Dual purpose for floor and wall with good adhesion workability
• Suitable for solid subfloors

• Thin - set cementitious screeds
• Cement Plaster

• 25 kg. Project packing of 40 kg size is available on demand

• Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area

• Add 25 kg of “MYMIX‐FTA (Floor Tile Adhesive)” to approx. 6.5 litres. To 7.5 litres. Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture
• After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel
• Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints
• The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential that you waterproof wet areas prior to tiling.
• New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling.
• Under normal circumstances, i.e. a temperature of 20° C and a relative humidity of 65%, the joints may be filled after minimum 24 hours.