Fire Retardant Paint

Listing ID #1513382

We provide one of the best Fire Retardant Paints for your buildings. With its additional protective layers, the paint swells at high temperatures to provide thermal insulation by creating a porous layer on the metal and between the surfaces. This does not have any odour and is eco-friendly and explosion safe. This provides more than 25 years of protection and is available with us at affordableprices.
Titan: Which can be used as a fire retardant coating for all steel structures & concrete interior areas not exposed to weathering & fully preserves the configuration of the treated surface.
 Description:
"Titan" fire-retardant paint is a suspension of heat-resistant, gasforming, foaming additives with inorganic fillers in the dispersion of
Polyacrylates : The paint swells at high temperature to form a thermal insulationporous layer on the metal and beton surfaces. Coating based on fire-retardant paint Titan" with an additional protectivedecorative
surface layer: Thermal insulating porous layer formedafter swelling of the coatings based on fire retardant paint "Titan" after fire exposure. Titan can be used as a Fire retardant coating for all surfaces of Steel structures and Concrete in interior Areas without exposure to weathering.Fire-retardant paint "Titan" is used for the flame-retardant treatment of steel and beton primed structures.

Up to 120 minutes fire resistance operating in interior (up to 150 minutes for beton surfaces). For fire protection of steel structures outside on surfaces not exposed to direct rainfall, "Titan" is used with an additional protective and decorative surface finishing. Fully preserves the configuration of the treated surface. Eco clean, non-toxic, fire and explosion safe. No sharp odor. More than 25 years of fire protection.Fire-retardant paint "TITAN" meets the requirements of the Technical Regulations on fire safety requirements (Federal Law of 22.07.2008

â�� 123-FZ), GOST 53295-2009 "Means of fire protection for steel structures."The coating is applied on primed steel structures (columns, beams, overlaps, connections, etc.). Check the condition and quality of previously applied anticorrosion coating, the time of its application. If necessary, repair the corrosion-resistant coating. Use the same materialat the repair (glyptal based anticorrosive primers are recommended) Ambient temperature - min +5 ° C; Relative humidity - 85%; The treated surface temperature should be above the dew point of not less than 3 ° C.

The application of paint performed by mechanical means, using airless aggregatesspraying high pressure plunger pump (type «WAGNER HC 960E»), or manually (brush orroller).The paint is thoroughly mixed with an electric mixer for 3 – 5 minutes before applying Fire-retardant paint is applied in layers, in several passes. Depending on the method ofapplication a layer thickness of the dried coating may be 100-400 microns.It's recommended to apply paint wet film of 400-600 microns thickness in one pass.Recoating is carried out after 2-6 hours (depending on the application conditions).Final drying: 1 - 4 days.

Coating based on the fire-retardant paint "Titan" can be operated in therange of temperatures from – 60 °C to +60 °C at the relative humidity of 85%.In case if relative humidity is more 85% , the use of additional protective anddecorative surface layer must be applied in accordance with the "Technologicalinstruction # 001-I-U / 8 on application and exploitation of fire retardant paint "Titan".
Packing: plastic or metal pails of 25 kg.
Transportation: at temperature above 0 °C.
Shelf life: in the manufacturer's packaging in a dry place at a temperature above 5 °C –12 months.