We offer two types of Fire Resistant Epoxy Paints – water based Fire Resistant Epoxy Paints and solvent based Fire Resistant Epoxy Paints. Water Based Fire Retardant Paints Flame Control No. 20-20A is a Class "A", interior, low VOC, water base, flat latex, fire retardant paint, manufactured in accordance with Federal Specification TT-P-001932. This coating dries quickly to a flat finish, having the appearance of a conventional flat latex paint. In the presence of heat or flame the coating puffs up (intumesces) and forms a thick, sponge like cellular foam layer; this foam layer insulates the substrate reducing the penetration of heat, thus retarding the flame spread and delaying structural failure.
Recommended Uses & Used By
For application to all interior combustible surfaces where it is either necessary or desirous to reduce the surface burning characteristics of the substrate. Schools, Colleges, Nursing Homes, Child Care Centers, Hospitals, Penal Institutions, Apartments, Hotels, Factories, Warehouses, Retail Stores, Restaurants, Utilities, Railroad and other Transportation Companies, Oil and Chemical Installations, Military Installations, and other facilities where
fire retardant coatings are required.
Performance Information
Fire Hazard Classification, ASTM E-84 (NFPA 255), Class “A”, Class "A" fire rated. Complies with federal, state, local building and fire code requirements. Dries by water evaporation to a tough, flexible, matte finish.  Does not leach (lose fire retardancy) on exposure to high humidity. Meets all VOC regulations, including SCAQMD.

• Spreading Rate : 155 sq. ft./gal. (3.8 m2/L) applied in one or two coats 10.4 mils wet, 4.8 mils dry
• V.O.C. : .0.41 lbs./gal. (49 g/L)
• Volume Solids : 46% ± 2
• Weight Solids : 59% ± 2
• Drying Time @ 77°F & 50% RHm
• To touch : 30 min.
• To handle : 1-2 hours
• To recoat  : 2 to 4 hours
• Type of Cure : Coalescence

We offer two types of Fire Resistant Epoxy Paints – water based Fire Resistant Epoxy Paints and solvent based Fire Resistant Epoxy Paints. Water Based Fire Retardant Paints Flame Control No. 20-20A is a Class "A", interior, low VOC, water base, flat latex, fire retardant paint, manufactured in accordance with Federal Specification TT-P-001932. This coating dries quickly to a flat finish, having the appearance of a conventional flat latex paint. In the presence of heat or flame the coating puffs up (intumesces) and forms a thick, sponge like cellular foam layer; this foam layer insulates the substrate reducing the penetration of heat, thus retarding the flame spread and delaying structural failure.
Recommended Uses & Used By
For application to all interior combustible surfaces where it is either necessary or desirous to reduce the surface burning characteristics of the substrate. Schools, Colleges, Nursing Homes, Child Care Centers, Hospitals, Penal Institutions, Apartments, Hotels, Factories, Warehouses, Retail Stores, Restaurants, Utilities, Railroad and other Transportation Companies, Oil and Chemical Installations, Military Installations, and other facilities where
fire retardant coatings are required.
Performance Information
Fire Hazard Classification, ASTM E-84 (NFPA 255), Class “A”, Class "A" fire rated. Complies with federal, state, local building and fire code requirements. Dries by water evaporation to a tough, flexible, matte finish.  Does not leach (lose fire retardancy) on exposure to high humidity. Meets all VOC regulations, including SCAQMD.

• Spreading Rate : 155 sq. ft./gal. (3.8 m2/L) applied in one or two coats 10.4 mils wet, 4.8 mils dry
• V.O.C. : .0.41 lbs./gal. (49 g/L)
• Volume Solids : 46% ± 2
• Weight Solids : 59% ± 2
• Drying Time @ 77°F & 50% RHm
• To touch : 30 min.
• To handle : 1-2 hours
• To recoat  : 2 to 4 hours
• Type of Cure : Coalescence