Fire Lite Annunciator

Listing ID #3968860

The LCD-80F is a compact, cost-effective, 80-character, backlit LCD remote Fire Annunciator for use with the Fire•Lite MS- 9200 Series and MS-9600 Series Fire Alarm Control Panels (FACPs). The LCD-80F displays complete system point status information and includes control switches for remote control of critical system functions.

features

• 80-character Liquid Crystal Display. • Mimics all display information from the host panel. • Control switches for System Acknowledge, Signal Silence, Drill and Reset with enable key.• System status LEDs for Power, Alarm, Trouble, Supervisory and Alarm Silenced. • No programming necessary — LCD-80F connects to the terminal port (TB7) on the FACP.• Displays device type identifiers, individual point alarm, trouble or supervisory, zone and custom alpha labels. • Time-and-date display field. • Aesthetically pleasing design. • May be powered by 24 VDC from the host FACP or by remote power supplies (requires 24 VDC). • Up to 32 LCD-80F annunciators per FACP. • Plug-in terminal blocks for ease of installation and service. • Can be remotely located up to 6,000 feet (1828.8 m) from the FACP. • Local piezo sounder with alarm and trouble resound. • Semi-flush mounts to 2.188"" (5.556 cm) minimum deep, three-gang electrical box (Fire•Lite P/N 10103) or threegangable electrical switchbox. • Surface-mounts to Fire•Lite SBB-3 surface backbox.

specification

The LCD-80F annunciator provides the FACP with pointannunciation with full display text on an 80-character LCD display. The LCD-80F also provides an array of LEDs to indicate system status, and includes control switches for remote control of critical system functions. The LCD-80F provides the FACP with up to 32 remote serially connected annunciators. All field-wiring terminations on the LCD-80F use removable, compression-type terminal blocks for ease of wiring and circuit testing. Communication between the FACP and the annunciators is accomplished over an EIA-485 serial interface, which greatly reduces wire and installation cost over traditional systems. Six wires total are required: four for the EIA-485 communications (two in and two return); and two for the 24 VDC regulated power. Dip switches control local functions such as: piezo disable, control switches/key-switch disable, transmit/receive mode.