Ferro Silicon Zirconium

Listing ID #6858211

Properties
Ferro Silicon Zirconium is the alloy of Iron Silicon and Zirconium produced by direct reduction of zircon sands in electric arc furnaces at high temperature. This alloy is used as Zirconium additive in steel melt, which reacts with Oxygen, Nitrogen and Sulphur. Zirconium has been used in steel making additive for over more than 40 years. But this alloy (FeSiZr) is still today the lowest cost source of Zr available as steel additive. The specification of FeSiZr supplied by Minex is given below

Production
When added in molten steel bath, it dissolved fast and Zirconium combines chemically with Oxygen, Nitrogen and Sulphur in the order named. The quantity of Zirconium addition per ton of steel required to improve steel properties has not been found to depend on the sulphur content as it is with RareXEarth metal addition. Consequently, it is more economical to use Zirconium and RareXEarth in steels with sulphur contents of 0.02% or more. Thus the amounts Zirconium to be added, depends more on the Nitrogen and Oxygen content than on Sulphur content. To be effective, the addition of Zirconium has to be sufficient to leave more free Zr after the precipitation of practically all the Nitrogen content as Zirconium Nitride and Zirconium Carbonitride. The addition of Zirconium can be made in Aluminium Killed steel as

Uses
FeSiZr is used to scavenge impurities (Oxygen, Nitrogen, Sulphur) or modify inclusion through the formation of complex sulphides and oxysulphides. ZrS is significantly more stable than MnS in steel. Therefore, if enough free zirconium is available during the early stages of solidification of a steel ingot, ZrS will form and prevent the formation of MnS. ZrS is much more refractory than MnS and practically non - deformable during hot rolling while, in aluminum killed steels, MnS produces long flat stringer inclusions in hot rolled plate and strip. The efficacy of Zirconium additions will therefore be measured not by the amount of residual "acid soluble" metal which remains, but by the extent to which inclusions are beneficially modified. It also raises the yield/tensile ratio and improves weldability through the reduction of under bead cracking and the elimination of porosity. In high alloys steels, Zirconium increases hardness but decreases ductility. In stainless steels, Zirconium retards the formation of sigma phase

Ferro Silicon Zirconium Market
Global Ferro Silicon Zirconium market size will increase by Million US$ by 2025.
Ferro Silicon Zirconium market size is in (value, capacity, production and consumption) in key regions like United States, Europe, Asia Pacific (China, Japan) and other regions.