Fluid Bed Dryer Tablet Press, For Feed Plant, Voltage : 380V

Advantages
The conventional drying method for drying products in tray dryers is rather inadequate & troublesome. They also occupy large space & have very high & uneven drying times and also involved high labour input. To over come this problem RIDDHI made Fluid Bed Dryer which is the simple solution to dry the products.
Suitabilities
This compact unit is suitable for drying granular, crystalline, coarse or similar materials in Pharmaceuticals, Dryer, Fine Chemicals & Food & Allied Industries. It is also possible to dry fine crystal or coarse materials in fluid bed dryers.
Description
Latest improvement in design makes this unit truly GMP model for Pharmaceuticals industries & versatile in operation for other industries like food, dyestuff, chemicals & polymer industry. In GMP models, all the contact parts made out of S.S.304 / 316 material & are provided with isolated panel board. However with standard Fluid Bed Dryers for product containers, retarding chamber are made out of stainless steel materials S.S. 304 only & other parts from mild steel sheet.
Batch Size
Batch size indicates weights of wet products (inclusive of moisture). Our Model RDFD-30 can take batch size of 30 to 40 Kgs. of wet material. Similarly model RDFD-120 can process 120 to 135 Kgs. of wet material per batch. The weight of materials to be loaded per batch depends upon the bulk density of wet material.
Operation
The wet material is introduced into the dryer as a batch of material in a product container which is provided with air distributor plate & clutch weave. Induced draught is created by the blower & fresh air is sucked into the unit. After filteration, clean air passes through the heating elements. This hot air then passes through the product containers, creating turbulance in the products & hence the product moves up and down known as Fluidization in the product container. Due to this process, the heat transfer is quick and the product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from the dryer.
Heating
Fluid Bed Dryer can be supplied in electric heating, steam heating or hot water circulation systems or gas heating system on demand. Electrically heated dryers are provided with electrical heating elements and are suitable to raise air temperatures by about 750 C (i.e from 300 C to 750 C). Similarly steam operated dryers are provided with steam radiator suitable to raise air temperature about 600 C to 750 C depending upon pressure of steam. Generally dryers bigger than RDFD- 60 are incorporated with steam heating system as it is more economical.
Drying Time
The drying time depends upon various factors such as physical properties of material, moisture content, type of moisture (free moisture or water of crystallization), drying temperature etc. The crystalline products can be dried faster than amorphous product containing same percentage of moisture at the same temperature. Generally pharmaceutical granules or crystals containing free moisture of about 20% to 25% can be easily dried in about 30 to 40 minutes at a temperature of about 750C. Certain crystalline materials containing about 40% of moisture can be dried in Fluid Bed Dryer within 35 to 45 minutes.
Important
In case the product contains solvents or inflammable substances, it is essential that the Dryer is steam operated &provided with flame proof motor.
Motor
The dryer will be provided with with suitable Remi/Hindustan/Sabar or standard ISI make motor of  2800 RPM
Filteration
Single stage filteration of  20 microns PP cloth filter,   P.P.  filter  bag   for   exhaust  air,  also multi stage filteration can be given on demand.Positive  Earthing  Arrangement,  explosion flap  are given as a part of standard features.
Control Panel
Pre-wired control panel  indicate Digital Timer, Digital Temperature  Indicator cum controller(Inlet), Digital Temp. Indicator (Outlet), Sensor, Star-Delta Starter with relay, Indicating  Lamps,  MCBs, Amp.  Meter cum Volt  Meter, Selector switch  etc.ack.
Special  Features

• Uniformityindryingandreduction indryingtime.
• Atmosphericinletairisfilteredbymeansofsingle / multi stagefiltersof 20 microns toprevent anyfine dust to passthroughtheproduct.
• SteamCoilmadeoutof1”dia. SS 304/316finnedtube&isdesignedtogetpressureofaround3-4kg./cm^2(workingpressure 3 kg/cm^2).
• Digitaltemperatureindicatorscumcontroller isprovidedwiththeunittoindicate theinlet and outlet air temperature as well as to controllerthepresentinlet air temperature.
• Air suction and discharge dampers provided to control the inlet and outlet airflow.
• Anexplosionsafetyflapofadequatecapacityattherear endofthe dryerandanpositiveearthingpointtopreventstaticchargeinthemachine are provided.
• Timerprovidedtosettheprocesstimewhichwillcutoffthemotorsupplyafterpre-settimeperiod.
• You  will  have  to  provide following
• Levelflooratsite.
• Requiredelectricalconnection up tothe machine throughsuitable isolatingswitch.
• Compressor with FRL to supply pure air to the Pneumatic components.
• Electrician at the time of Installation.
• Ducting from exhaust to the wall with fittings.
• Proper floor pan to be given at the time of ordering the machine.
• Steam boiler and all the connections, fittings and pipe, with controllers and pressure gauges to be connected to the radiator by party.
• 3 phase power supply upto the control panel of the machine.
• Inlet steam & outlet steam line with pressure gauge safety valve, by pass, On & Off Gate Valve provision to be made, electrical operated steam control valve 1 inch or ¾ inch BSP to be given.
• 4 sq.mm 6 core wire from panel Board to main motor.
• 1.5 sq. mm 2 core wire from panel Board to Pneumatic section.
• 0.5 mm 3 core wire from Panel Board to inlet & out let sensor.