External Hard Drive Docking Station

• Dual bay docking Station allows an Easy Accessing with two 2.5 inch & 3.5 inch sata hdd ,ssd, Support uasp protocol and 2x8tb hard drives

• Superspeed usb 3.0 interfaces with data transfer rates up to 5gbps; 20% Faster than the Traditional usb 3.0 with uasp protocol

• Support hard disk cloner/duplicator; High Speed 1 to 1 clone source hdd to target hdd without connect to computer

• Touch On/Off switch for easy power control. Plug & Play. No driver needed.

• Equipped with 12v4a Power adapter, can Provide enough Power for your devices, Ensure the data stable and safer

Brand: Storite

Product Type: 2.5''/3.5'' Dual Bay External Hard Drive Docking Station with Clone function

Product Features:

Touch On/Off switch for easy power control. Plug & Play. No driver needed.
Auto Sleep-Mode after 10 minutes of inactivity. Save energy and drives life cycle.
Supports most updated Windows O/S & Mac OS 9.1/10.8.4 or above; Backward compatible USB 2.0 /1.1 connections.
There is a switch on the back, pull to activate clone function,
you are allowed to clone between disks without a host computer,
much easier to copy data from one drive disk to another.

Using the Clone Function :

• Available with Offline cloning function
• Install the source and target HDDs into the labelled appropriately bay.
• The Target HDD must be of equal or larger capacity than the source HDD Press the power switch ON (Red).
• HDD1 (LED of Source HDD) and HDD2 (LDE for Target HDD) light up (White).
• Press and hold the START button by 3 seconds till Blue lights flashing.
• (25/50/75/100% LED Blue lights shows the clone process. When Clone completed, all lights will stop flashing and Clone Station will switch off)

How to install : 2.5/3.5inch Compatibility ,Tool-Free installation For 2.5-inch & 3.5-inch HDD/SSD

• Connect the USB Cable to the matching port on the back of the docking station and your computer.
• Connect the power cable to the back of the docking station and to the mains power supply
• Firmly insert you SATA Hard Drive face down with the connectors aligned to the SATA interface
• Turn on the Docking Station using the touch on/off switch
• No driver is required; allow your computer to detect and install the docking station
• Once your computer has finished installing the Docking Station It is ready to use

Reading disk function:

• It can search two hard disk at the same time
• It can be external on the desktop, Plug and Play, no driver installation needed, easy to use, suitable for home and office use,
• Power adapter provides a stable power supply, compatible with most major operating systems

Support:

• 2.5/3.5 inch SATA HDD/SSA up to 8TB mount your hard drives in seconds