Epoxy Inorganic Zinc Silicate

Listing ID #1250988

We are ranked among Manufacturers & Suppliers of premium Epoxy Inorganic Zinc Silicate in Pune, Maharashtra, India. Our Epoxy Inorganic Zinc Silicate is excellent for protecting metal surfaces from corrosion. It is a great primer used in various industries. Our company manufactures Epoxy Inorganic Zinc Silicate using up-to-date technologies with superior-grade raw materials. Buyers can order Epoxy Inorganic Zinc Silicate as per requirement and expect on-time delivery. 

Scope : A dual pack Paint possessing excellent durability & Weather properties. The product is designed to withstand a constant.

 Use : Recommended for use outside structural steel etc.

Product Data :

• Type : Two Pack, cured with polyamide
• Composition : Epoxy resin/metallic zinc with silicon vehicle
• Application: Brush / Conventional spray.
• Recommended DFT : 50-60 microns. per coat.
• Theoretical Spreading Rate : 9.0-12.8 Sq. meter/Liter.
• Practical Spreading Rate : 6-7 Sq. meter/liter.

• Drying Time :
  Recoating : Minimum : 6-8 hrs.
  • Surface Dry : 50 mins.
  • Tack Free : 2 hrs.
  • Handle : 4-5 hrs.
  • Hard Dry : Overnight.
  • Complete cure : 7 days
• Flash Point : Above 30°C.
• Colour : Grey
• Thinner : Pragati Make Epoxy Thinner ( PPCOAT EPX T200)
• Finish : Smooth & Matt.
• Temperature Resistance : continuous 200°C.
• Weatherability : Excellent.
• Flexibility : Excellent.0
• Storage Life : Up to 9 month in intact condition or sealed the containers are kept under cover in a dry place under normal temperature conditions.

Surface Preparation : Make full use of mechanical tools along with manual chipping & Wire brushing to remove loose particle rust sanding to Sa2 ½ sand paper. Excessive burnishing of steel is to be avoided.

Application : Stir well when apply. To mix proper by manual or machine tool stirrer & apply brush, apply airless gun for achieved recommended DFT.
Resistance Guide : 

• Salt : Good
• Water : Good.
• Chemical : Fair

Note :

• The mix primer must be used off within 3 hours for obtaining better finish.
• Do not apply when temperature falls below 10°C & when relative humidity rises above 90% do not apply during rain Fog or mist.