IMPURITIES IN MACHINE OILS & FLUIDS

The oils and fluids used in machines pick up minute solid contaminants during working. Actually oil molecules and additives break down chemically due to aging, pressure, temperature, moisture etc., and get oxidised to form polar compounds. These compounds combine together to form an insoluble sediment which is termed as vanish/tar. Most machine malfunctions are due to this contaminants which stick on to the active surfaces of the machine, increasing abrasion and reducing lubrication.

Our range of oil cleaning systems work on the principle of electrostatic.
The oil is circulated through the special electrostatic cell provided in the machine. This cell induces electrostatic charge on suspended solid contaminants in oil/ fluids. These charged suspended particles moves under electric field and deposits on dielectric media provided in the cell.

Pon OilCare cleaning machine can be used for hydraulic , lubricating oils and synthetic fluids which are non conductive and have less than 500PPM moisture.

• Reduce machine down time
• Machine Can be put on line
• Removes both polar, non-polar & neutral particles
• Filtration efficiency is down to 0.01 micron
• Reduce environmental liabilities
• Prevents sticking or friction of moving parts such as servo/directional valves
• Increases heat transfer efficiency in heat exchangers by reducing deposits
• No clogging & pressure losses as in mechanical filtration
• Increases oil life and reduces maintenance

• Works on 230V single / 440V three phase
• Maximum power consumption: 250W Micro-controllerbased system with LCD display consisting of:
• Fault indication - Oil temperature - High voltage applied - Current flow (mA) - Running Hrs

IMPURITIES IN MACHINE OILS & FLUIDS

The oils and fluids used in machines pick up minute solid contaminants during working. Actually oil molecules and additives break down chemically due to aging, pressure, temperature, moisture etc., and get oxidised to form polar compounds. These compounds combine together to form an insoluble sediment which is termed as vanish/tar. Most machine malfunctions are due to this contaminants which stick on to the active surfaces of the machine, increasing abrasion and reducing lubrication.

Our range of oil cleaning systems work on the principle of electrostatic.
The oil is circulated through the special electrostatic cell provided in the machine. This cell induces electrostatic charge on suspended solid contaminants in oil/ fluids. These charged suspended particles moves under electric field and deposits on dielectric media provided in the cell.

Pon OilCare cleaning machine can be used for hydraulic , lubricating oils and synthetic fluids which are non conductive and have less than 500PPM moisture.

• Reduce machine down time
• Machine Can be put on line
• Removes both polar, non-polar & neutral particles
• Filtration efficiency is down to 0.01 micron
• Reduce environmental liabilities
• Prevents sticking or friction of moving parts such as servo/directional valves
• Increases heat transfer efficiency in heat exchangers by reducing deposits
• No clogging & pressure losses as in mechanical filtration
• Increases oil life and reduces maintenance

• Works on 230V single / 440V three phase
• Maximum power consumption: 250W Micro-controllerbased system with LCD display consisting of:
• Fault indication - Oil temperature - High voltage applied - Current flow (mA) - Running Hrs