Listing ID #2701189
Company Information
Ask for more detail from the seller
Contact SupplierWe are the manufacturer of Engine valves for all kind of Gasoline, Diesel and Industrial IC Engines.
Normally, a valve should rotate during the engine run. Rotating valves have high life certainly. Rotating valves have high life certainly. Uniform heating of valve seat surface (means no heat collections local heat areas ), preventing of some carbon adhesions, valve train disturbances and the good running surface on the valve tip depend on the valve rotation. Rotating event, if no rotator mounted, happens by normal vibration of the engine and also spring stroke. The valve does not rotate by deformed or not good weak springs. Valve should be rotated normally, no fast or no slowly. Good springs and rotator (roto cups) result in normal rotation of valve and no wear on the tip or no local heating or burning on seat surfaces.
We apply special process on the product as per drawing’s description or customer’s requirement like Bi-metal valve, chrome plated on the stem, Tired valve, Seat face induction valve, though pass induction of Tip hardness.
Application Used:
Sr. No | Material | C | Si | Mn | Ni | Cr | N | S | P | Cu | Fe | Ti | AI | Co | B | Zr | Pb | O | W | Mo | Nb | Sn |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inconel | ||||||||||||||||||||||
1 | X – 751 | 0.10% | 0.50% | 1.00% | - | 14.0%- | Bal | - | - | - | 7.00% | 2.20% | 1.00% | - | - | - | - | - | - | - | 0.7%- | - |
17.00% | 1.20% | - | ||||||||||||||||||||
Nimonic Alloy | ||||||||||||||||||||||
2 | Nimonic (80A) | 0.04%- | Max 1 % | Max | Max | 18%- | - | Max | Max | Max | Max | 1.8%- | 1%- | Max | Max | Max | Max | - | - | - | - | - |
0.1% | 1.00% | 65% | 21.00% | - | 0.015 | 0.02% | 0.20% | 3.00% | 2.70% | 1.80% | 2.00% | 0.01% | 0.15% | 0.00% | - | - | - | - | - | |||
Inconel | ||||||||||||||||||||||
3 | Ti6AL2SN4ZR2MO | Max | 0.06%- | - | - | - | Max | - | - | - | Max | Bal | 5.50%- | - | - | 3.60%- | - | Max | - | 1.80%- | - | 1.80%- |
0.05% | 0.12% | - | - | - | 0.05% | - | - | - | 0.25% | 6.50% | - | - | 4.40% | - | 0.05% | - | 2.20% | - | 2.20% | |||
Cobolt Based Alloys | ||||||||||||||||||||||
4 | Stellite #1 | 2.50% | - | - | - | 0.30% | - | - | - | - | Max | - | - | Bal. | - | - | - | - | 0.12% | - | - | - |
- | - | - | - | - | - | - | 3.00% | - | - | - | - | - | - | - | - | - | ||||||
Stellite #6 | 1.10% | - | - | Max | 0.28% | - | - | - | - | Max | - | - | Bal. | - | - | - | - | - | - | - | - | |
5 | - | - | 3% | - | - | - | - | 3.00% | - | - | - | - | - | - | - | - | - | - | ||||
Stellite #12 | 1.80% | - | - | Max | 0.30% | - | - | - | - | Max | - | - | Bal. | - | - | - | - | 0.09% | - | - | - | |
6 | - | - | 3% | - | - | - | - | 3.00% | - | - | - | - | - | - | - | - | - | |||||
Austinellic Stainless Steel | ||||||||||||||||||||||
7 | 21-4N | 0.48%- | Max | 7%- | 3.25%- | 20%- | 0.5%- | Max | Max | - | Bal. | - | - | - | - | - | - | - | - | - | - | - |
SUH35 | 0.58% | 0.25% | 10% | 4.50% | 22.00% | 0.35% | 0.03% | 0.05% | - | - | - | - | - | - | - | - | - | - | - | - | ||
1.4871 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
21-2N | 0.50%- | 0.08%- | 7.0%- | 1.50%- | 19.25%- | 0.20%- | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
8 | 1.4875 | 0.60% | 0.25% | 9.5% | 2.75% | 21.50% | 0.40% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Martensitic Steel | ||||||||||||||||||||||
9 | EN52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
SUHI | 0.4%- | 2.7%- | Max | Max | 08%- | - | Max | Max | - | Bal. | - | - | - | - | - | - | - | - | - | - | - | |
1.4718 | 0.5% | 3.3% | 0.6% | 0.5% | 10% | - | 0.03% | 0.04% | - | - | - | - | - | - | - | - | - | - | - | - |