Energy-Saver - FridgeInput : 230 V +/- 10% Output : 230 V +/- 10%, 6 A Indication : Mains ON, Saver ON Delay : 3 minute for saver to start Dimension : 137 mm X 42 mm X 50 mm (for 6 A, Plastic....
Dimension : 137 mm X 42 mm X 50 mm (for 6 A, Plastic body), 150 mm X 62 mm X 50 mm (for 16 A, Plastic body)
No additional Isolation, Fuse, Protection provided Energy-Saver - A/C :
Input : 230 V +/- 10%
Output : 230 V +/- 10%, 20 A
Protection : Under Voltage Saver bypass
Indication : Mains ON, Saver ON
Isolation : ON/OFF MCB,25 A
Delay : 3 minutes for saver to start
Dimensions : 200 mm X 180 mm X 65 mm - Metallic body
No Fuse provided
Metal clad socket provided Energy-Saver - Home :
Input : 230 V +/- 10%
Output : 230 V +/- 10%, 20 A
Protection : Under voltage saver bypass
Indications : Mains ON, Saver ON
Isolation : Nil
Delay : 1 minute for saver to start
Termination : 32 A terminal strip is provided.
Bypass : 15 A, 2 Pole, 2 way bypass switch
No Fuse
Dimensions : 200 mm X 200 mm X 52 mm Energy-Saver - Operational Principle & Advantages Background : No machine is perfect. Every machine has its own efficiency which is basically a ratio of output power to input power as a percentage. Machines mostly use popular induction motor (single Phase OR Three Phase); They rarely operate on full load and most of the time they operate on partial load or no load. Under such circumstances when the motor is on partial load or no load the power required by motor is less but actually excess power is fed to motor. Enertech's Energy Saver senses the exact power required by motor under different loading conditions and adjusts the power level to the motor's requirement. The excess power consumed in a motor (in the form of losses) is thus saved. There are no external capacitors required for Power Factor improvement. There is no starter required for this equipment. Existing starter will be continued in circuit. After saving the energy the motor speed remains same; motor KVA reduces, saving electricity. Principle of Operation : The energy saving is achieved through our proprietary firmware, which constantly monitors power factor of the load. Suitable program invokes correction of the Power Factor to ensure losses are reduced because of the inductive effect of the load. Working of Energy Saver :
It can benefit all 1-phase & 3-phase induction motor users. It is generally observed that most AC Motors are under full load for only limited periods and at other times are operating on partial loading or no load conditions. Under those conditions energy is wasted as heat, vibration, magnetic losses.
Unfortunately motors have no way of intelligently adjusting the amount of electricity they draw in relation to the work they do.
If one can intelligently monitor and reduce the power drawn by a motor to match its actual need then there is a lot of scope to save energy.
It uses a powerful Micro-Controller Electronics circuitry to supply proportional volts and allow required current to flow into the motor ensuring required torque potential is always available.
The soft start facility reduces the maximum demand with smooth stepless acceleration minimizing strees on mechanical transmission system. Advantages of Energy Saver :
Saves electrical energy and electricity bill depending on type of load and loading conditions upto 25%
Reduces losses and increases efficiency (of motor, tube lights, fans) which reduces heating in motor winding, tube light chokes etc.
Since, heating is reduced and energy saver has soft start (for motor) the average inrush current also reduces. Indirectly life of the motor increases.
As electricity-billing rates are increasing these days, this equipment has a good pay back period.
The statutory connected AC capacitors improve the Power Factor but make different in the RKVAR meter reading. However, this Energy Saver will make a difference in the ordinary meter readings also. Hence this Energy Saver will directly reduce your electricity bill.
Member Since 23 Years
Nature of Business Retailer
For Buyer 
For Seller 
Help 
Mulshi, Pune, Maharashtra 
Send Enquiry