We are supplying Binay make LED Aviation Obstruction Lights.

Binay’s LED (Light Emitting Diode) Aviation Light is a “fit-and-forget” solution that utilizes the latest InP LED technology to eliminate the cost, hazard, and aggravation of frequent replacement – an inherent feature of the conventional filament bulb or neon spiral units used in this application.

Advantages:

• Long life of 1,00,000 hours
• Low power consumption of 10 to 15 watts only in Low-Intensity models, giving a significant reduction in energy costs
• Solid-state reliability; built-in fail-safe feature
• Shock-proof, vibration-resistant construction
• Ability to withstand voltage fluctuations
• Improvement in power factor
• A short payback period

Features:

• Enhanced Light Intensity (TWICE the minimum requirement)
• EMI/RFI Protection
• Low Power Consumption
• InP LED Technology
• Fail-Safe Design
• Rugged Heavy Duty Construction

Specification:

• Protection: Weatherproof IP 65
• Construction: Cast metal LM-6 alloy
• Dome: Toughened clear (transparent) borosilicate hard glass
• Gasket: Endless neoprene
• Finish: Aviation yellow epoxy paint or powder coated
• Weight: 4.5 kg. (approx.)
• Cable entry: ET 19mm
• Terminals: Fitted in a weatherproof box on the body of the unit.
• Earth terminal provided externally
• LEDs: Multiple InP technology LEDs
• Colour: Red (wavelength: 615-650nm)
• No. of circuits: Five (in parallel)
• Maximum forward current: 160mA
• Power factor: 0.05
• Typical power consumption: 15W maximum at 230V AC 
• Insulation resistance: 10 megohms at 500VDC
• Dielectric strength: 2.5 kV
• Earthing: Terminal provided on the body
• Spike Protection: Surge protectors provided
• EMI/RFI Protection: Filter incorporated for protection against electromagnetic and radio frequency interference and random line
• noise
• Lightning Protection: Gas discharge tubes can be provided to protect against the indirect effect of lightning strikes

We are supplying Binay make LED Aviation Obstruction Lights.

Binay’s LED (Light Emitting Diode) Aviation Light is a “fit-and-forget” solution that utilizes the latest InP LED technology to eliminate the cost, hazard, and aggravation of frequent replacement – an inherent feature of the conventional filament bulb or neon spiral units used in this application.

Advantages:

• Long life of 1,00,000 hours
• Low power consumption of 10 to 15 watts only in Low-Intensity models, giving a significant reduction in energy costs
• Solid-state reliability; built-in fail-safe feature
• Shock-proof, vibration-resistant construction
• Ability to withstand voltage fluctuations
• Improvement in power factor
• A short payback period

Features:

• Enhanced Light Intensity (TWICE the minimum requirement)
• EMI/RFI Protection
• Low Power Consumption
• InP LED Technology
• Fail-Safe Design
• Rugged Heavy Duty Construction

Specification:

• Protection: Weatherproof IP 65
• Construction: Cast metal LM-6 alloy
• Dome: Toughened clear (transparent) borosilicate hard glass
• Gasket: Endless neoprene
• Finish: Aviation yellow epoxy paint or powder coated
• Weight: 4.5 kg. (approx.)
• Cable entry: ET 19mm
• Terminals: Fitted in a weatherproof box on the body of the unit.
• Earth terminal provided externally
• LEDs: Multiple InP technology LEDs
• Colour: Red (wavelength: 615-650nm)
• No. of circuits: Five (in parallel)
• Maximum forward current: 160mA
• Power factor: 0.05
• Typical power consumption: 15W maximum at 230V AC 
• Insulation resistance: 10 megohms at 500VDC
• Dielectric strength: 2.5 kV
• Earthing: Terminal provided on the body
• Spike Protection: Surge protectors provided
• EMI/RFI Protection: Filter incorporated for protection against electromagnetic and radio frequency interference and random line
• noise
• Lightning Protection: Gas discharge tubes can be provided to protect against the indirect effect of lightning strikes