Company Information
Member Since 4 Years
Nature of Business Manufacturer Year of Establishment 2004Ask for more detail from the seller
Contact Supplier
Plaster Masters Ecoplast is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives. It is supplied as dry powder in pre-weighed bags ready to use on site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.
Plaster Masters Ecoplast is used for masonry, civil repair, plastering on inner and outer walls. It can be used on brick, block, stone walls as well as concrete surface.
ADVANTAGES
METHOD OF APPLICATION
SURFACE PREPARATION
The surface should be clean, sound and free from loose material, grease, oil paint etc. Prior to Plaster Masters Ecoplast application, soak the entire surface with clean water.
MIXING
Mix Plaster Masters Ecoplast with 12-13 % water by weight of the material. Stir for 2-3 min, to have a consistency free of lumps.
APPLICATION
Plaster Masters Ecoplast can be applied by normal masons just like the conventional method.
CURING
In general, no curing is required for Plaster Masters Ecoplast. However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from the applied surface.
PACKAGING & STORAGE
40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.
SAFETY
Use of dust mask, safety goggles and gloves are recommended.
| Points | Ready Mix Plaster | Conventional Mortar |
|---|---|---|
| Raw Material(Sand & Cement) | Consistent quality | Inconsistent quality |
| Mixing Ratio (Sand & Cement) | Fixed | Will always very at different times |
| Finish | Smooth | Rough |
| Wastage | Minimum wastage(3-5%) | Heavy wastage in shifting, sieving of raw material & application of plaster (15-20%) |
| Consumption | 0.17/kg.sq.ft./mm on brick wall, 0.13/kg.sq.ft./mm on AAC block wall | 0.35/kg.sq.ft.mm |
| Curing | Almost no curing (only 1 curing required after 24 hours of plastering) | Extensive curing required |
| Cracks | Negligible shrinkage cracks | Shrinkage cracks are observed |
| Manpower | Less as ready to use mortar & almost no curing | Practically higher for raw material processing application & curing |
| Edges | Sharp edges possible | Sharp edges not possible |
| Space Constraint | Easy to carry in narrow streets, plastering can be done very conveniently in any circumstances/weather | Separate space needed for keeping sand & cement |
| Stocktaking | Easy to count & reconcile as available in bags | Very difficult |
| Paint Finish | Quality and life of paints are enhanced | Average & inconsistent |
| Quality | Consistent | Irregular |
Connect with us
For Buyer 
For Seller 
Help 
Madri, Udaipur, Rajasthan 
Send Enquiry