Company Information
Ask for more detail from the seller
Contact SupplierThe next process after cutting & creasing of the sheet is slotting & corner cutting. It is simultaneously done over the eccentric slotter machine. Slot dies are mounted on an eccentric shaft which causes them to move in an arc so that the board is slotted in a shearing manner. The corner die is moved, likewise. The sheets are fed through the machine by hand. Due to its rugged construction it can take up a number of sheets in one stroke. The dies can be moved on the machine very easily & the slot depth can be adjusted bythe gauge provided along it. Two guides are provided on the feed table, to support the sheets at correct dimension and feeding.
Technical Specifications:
Size | Capacity (Stks./Min.) | Min. Space between slots | Max. Slot depth | Corner Width | Power Required | Floor Space | Gross Weight |
65” | 30” | 5” | 14” | 2.75” | 2 H.P. | 90”x54” | 1600 kgs. |
75” | 30” | 7” | 17” | 3.5” | 3 H.P. | 100”x56” | 2100 kgs. |
85” | 30” | 7” | 18” | 3.5” | 3 H.P. | 110”x56” | 2300 kgs. |
95” | 30” | 8” | 21” | 4” | 5 H.P. | 120”x60” | 2500 kgs. |
Size | Capacity (Stks./Min.) | Min. Space between slots | Max. Slot depth | Corner Width | Power Required | Floor Space | Gross Weight |
65” | 30” | 5” | 14” | 2.75” | 2 H.P. | 90”x54” | 1600 kgs. |
75” | 30” | 7” | 17” | 3.5” | 3 H.P. | 100”x56” | 2100 kgs. |
85” | 30” | 7” | 18” | 3.5” | 3 H.P. | 110”x56” | 2300 kgs. |
95” | 30” | 8” | 21” | 4” | 5 H.P. | 120”x60” | 2500 kgs. |