Company Information
Member Since 7 Years
Nature of Business Retailer Year of Establishment 2009Ask for more detail from the seller
Contact Supplier
Dubond’s Duplast NP is a normal plasticizer , a ready-to-use, liquid admixture used for making more uniform and predictable quality concrete. Recommended from M 15 Grade of Concrete to M 25 grade of concrete.
Dubond's Duplast NP (Normal Plasticizer) is based on processed a Sulphonated Naphthalene Polymer based formulation and is supplied as a brown liquid. Generally cement particles tend to clump together and Duplast NP works by improving the dispersion of agglomerates within in the concrete mix which ensures that cement is used more efficiently. Duplast NP is low cost water reducer which can be used to get one or combination of benefits. It may be used with all types of OPC and high alumina cements.
Uses
Light Weight concrete
Pervious Concrete
Precast concrete
Pumped concrete
Ready-mixed concrete
Self Consolidating Concrete (SCC)
Shotcrete ( Guiniting )
Advantage and BenefitsBetter Compaction and Finishing by acting as Viscosity Modifier
Easier Placing
Easier Placing
Increases Extra Bonding StrengthReduce risk of Segregation and Bleeding
Duplast NP is formulated to meet
ASTM - C – 494 / C - 494 M requirements.
Water Reducing Admixture for concrete complies to BS – 5075 : 1982 Part 1
IS - 9103 : 1999 and ASTM - C - 494 Type A & D.
Type A Water - Reducing
Type B Retarding
Type D Water - Reducing & Retarding Admixtures.
Duplast NP is a ready-to-use liquid which is dispensed into the concrete together with the mixing water. The plasticising effect and water reduction are higher if the admixture is added to the damp concrete after 50% to 70% of the mixing water has been added.
DosageDuplast NP admixture is recommended for use at a dosage of 150ml to 250ml / 50 kg) of cementitious materials for Type A applications and up to 350 ml / 50 kg) for Type B and D requirements. Because of variations in atmospheric conditions, job conditions and concrete materials, dosages other than the recommended amounts may be required. In such cases, contact your local sales representative.
The correct quantity of Duplast NP should be measured with recommended dispenser and should be thoroughly dispersed with approx. 25 % of the recommended water content (based on mix design by weight) Mix concrete constituents along with balance approx. 75 % of the recommended water content (based on mix design by weight) for 3 minutes. As soon as step 2 is over, the admixture dispersed in water (as in step-1) is to be added to the wet concrete and mix it further for 2-3 minutes to get a homogeneous mix.
Duplast NP admixture may be used in combination with any Dubond admixture. When used in conjunction with other admixtures, each admixture must be dispensed separately into the mix. It is also compatible with slag and pozzolans such as fly ash, metakaolin and silica fume.
CorrosivityDubond Duplast NP(Normal Plasticizer) shall neither initiate nor promote corrosion of reinforcing steel in concrete.
Safety precautionsAs with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs (which can also be tainted with vapour until product fully cured or dried)
Shelf Life
Connect with us
For Buyer 
For Seller 
Help 
Thaltej, Ahmedabad, Gujarat 
Send Enquiry