Listing ID #4193147
Company Information
Ask for more detail from the seller
Contact Supplier- | Test Method | Typical |
---|---|---|
Appearance | A representative sample of the oil shall be examined in a 100 mm thick layer at 27oC | Clear and transparent and free from suspended matter or sediments |
Density at 29.5oC, g/cc | IS 1448 [P : 16] : 1990 | 0.8279 |
Kinematic viscosity, at 27oC at 40oC |
IS 1448 [P : 25] : 1976 | 16.46 11.76 |
Interfacial tension at 27oC, | IS 6104 : 1971 | 0.044 |
Flash point Pensky-Marten (closed),oC | IS 1448 [P : 21] : 1992 | 148 |
Pour point, oC | IS 1448 [P : 10] : 1970 | -18 |
Neutralization value a) Total acidity, b) Inorganic acidity/alkalinity |
IS 1448 [P : 2] : 1967 | Nil Nil |
Corrosive sulphur | Annex B of IS 335 - 1993 | Non Corrosive |
Electric strength (breakdown voltage) a) New unfiltered oil, b) After filtration, min |
IS 6792 : 1992 Note 2 |
72 |
Dielectric dissipation factor (tan δ) at 90oC, |
IS 6262 : 1971 | 0.00025/2.05 DC |
Specific resistance (resistivity) a) At 90oC, b) At 27oC, |
IS 6103 : 1971 | 750 × 1012 ohm-cm 7650 × 1012 ohm-cm |
Oxidation stability a) Neutralization value after oxidation, b) Total sludge, after oxidation, |
IS 12422 - 1988 | Nil Nil |
Oxidation stability (Rotating Bomb test), minutes |
IS 12958 - 1990 | 210 |
Oxidation inhibitor, percent by, wt | IS 13631 - 1993 | 0.26 |
Water content, ppm | IS 13567 - 1992 | 9 |