Listing ID #6060010
Company Information
Ask for more detail from the seller
Contact SupplierCleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid | Pass |
Thermal (hot water) disinfection• Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying.
• Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). | Pass |
Ultrasonic cleaner 3KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn | Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
Application and Installation | |
---|---|
Application | Medical devices |
Applicable surface | Metal, plastic |
Mounting methods | Epoxy, tag carrier, welded |
Epoxy | FDA approved, autoclavable |
Product Dimensions | |
---|---|
Dimensions (mm) | ø 6 x 2.5 |
tolerance | +/- 0.2 |
Dimensions (in) | ø 0.24 x 0.1 |
tolerance | +/- 0.008 |