Listing ID #3012509
Company Information
Ask for more detail from the seller
Contact SupplierPrimary Flow Tube | |
---|---|
Media Pressure | 20kg/cm2, 25 kg/cm |
Media Temperature | PTFE LINER (0 – 90 oC max) Hard Rubber LINER( 0 – 90oC max) |
Ambient Temp | 0oC to 60 oC |
Materials | Pipe SS 304 [non magnetic & without paint] |
Electrodes | SS 316/SS 316L/ hastelloy C |
Inner lining | PTFE / Hard rubber |
Coil Housing | CS (Polyurethane Painted) |
Amplifier / Transmitter | |
Type | Integral / Remote Mounting / blind 4-20mA Transmitter |
Enclosure | Aluminum Die-cast - for Amplifier / Transmitter |
Dimensions | 160 mm (L) x 100 mm (W) x 80 mm (D) (Head mount mounting) 64 mm (L) x 44 mm (W) x 35 mm (D) (remote mounting) |
Cable Entries | 3 nos. for remote / integral Transmitter |
Cable Glands | PG-7 [Standard] |
Power Supply | 110 V / 220 V AC 50 Hz S.P. ± 10 % |
Temperature | 0 – 50 oC (Operating Ambient) |
Temp. Drift | 0.010 % / oC |
Humidity | 90 % R.H. max. Non-condensing |
Input | Micro-volt signal proportional to flow rate from Flow Tube |
Outputs | 4 – 20 mA dc in max. 110 Ohms – Proportional (0 – 100 % flow rate) |
Flow rate | m³/hr, Lit/hr, Lit/min & Lit/sec |
Min. Media | 5 µSiemens / cm (Conductivity) |
Coil Excitation | Pulsed DC |
Flow Velocity | a) 1.25m/s, b) 2.5m/s, c) 5.0m/s, d) 10.0m/s b) V=0.3m/s, b) V=1m/s, c) V=12m/s |
Accuracy | ± 1% (10 % to 90 % of calibrated range in ref. conditions) |
Ref. Conditions | Power supply nominal ± 10% Temperature 27oC ± 2oC |
Repeatability | ± 0.2 % of reading |
Ingress Protection | IP – 65 Equivalent |