10-50C Digital Battery Plastic DEW-POINT-METER, For Lab Use, Medical Use, Certification : CE Certified

₹ 65,000 - ₹ 90,000 / Piece

MOQ1 Piece
Brand NameENDEE
MaterialPlastic
Driven TypeBattery
Meter TypeDigital
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Company Information

Member Since 14 Years
Nature of Business Retailer
Year of Establishment 1982

Ask for more detail from the seller

Report incorrect details

Product Details
Company Details

Brand NameENDEE
MaterialPlastic
Driven TypeBattery
Meter TypeDigital
ShapeRectangular
ColorBlue
ApplicationLab Use, Medical Use
CertificationCE Certified
FeatureEasy To Use, High Accuracy, Light Weight, Low Battery Consumption
TypeDew Point Hygrometers
Temperature Range10-50C
Country of OriginIndia

Air or Gas samples up to 12kg/cm² pressure and temperature up to 75°C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure.

AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings.

Endee Model AMM-60 Dew Point Meter, a portable instrument is designed to measure the performance of compressed air and process drying systems. It is ideal for Moisture monitoring in commercial and industrial applications.

Periodic monitoring of industrial Air systems results in a reduced maintenance cost & down time caused by condensate, the leading cause of corrosion in pneumatic systems.

Handy and Light Weight
Instant Direct dew point reading
Digital Display
Over all range - 60° C TO + 30°C
Samples Pressure Upto 12 Kg/C2M
Inbuilt Thin film water vapour sensor
Optional RS 232 Computer Interface & Data Logger

PRINCIPLE	CAPACITIVE THIN FILM Polymer
DEW POINT RANGE	- 60° C TO + 30°C
MOISTURE.	0 - 23000 PPM
ACCURACY	+/- 2% of FS
MAXIMUM SAMPLE TEMP.	75°C
MAXIMUM PRESSURE	12kg/cm
RESPONSE TIME	10 SECONDS FOR 63% STEP CHANGE
DISPLAY	3 1/2 DIGIT LCD (Alpha Numeric)
POWER	Rechargeable Batteries
INLET SAMPLE PORT.	1/4” OD TUBING
DIMENSIONS.	196 X 100 X 40 mm ABS ENCLOSURE
WEIGHT	1/2 KG
ADDITIONAL FEATURES (OPTIONAL)
Computer Interface	RS-232 link for Data in ASCII Delimited Format, 2400 Baud 8 Bits, 1 Stop, 1 Start, No Parity.
Data Logger	32 Kbyte, Non-Volatile Memory
ACCESSORIES	Charger working on 230V AC 50 Hz, Instruction manual, calibration test certificate, Leather carrying case, 5LPM flow meter, 2 mtr teflon tubing