The VolkanPro150 is a compact and efficient, fast burning mixed waste stream incinerator.
The VolkanPro is extremely efficient at burning municipal waste and turning this waste to ash reducing its volume and also providing heat as a by-product. This waste stream is normally mixed and includes household, garden waste, street waste as well as retail and commercial waste.
The VolkanPro150 is a robust, highly efficient incineration system engineered to incinerate a variety of waste streams.
CONTROL
Fully automatic sequential control provided by internal PLC system providing control of:
secondary chamber pre-heat
burn cycle (variable)
cool down cycle
FUEL OPTIONS
Diesel
LPG
Natural Gas
FUEL CONSUMPTION
Diesel: 4-6lhr
LPG: 6-8lhr
Natural Gas: 7-9Nm³hr
BURN RATE
Up to 50kg per hour dependent upon loading method and actual calorific value of the waste. Fresh waste with a calorific value of 8Mjkg or better and less than 62% moisture will result in higher burn rates. Low calorific value or old waste will result in far lower burn rates. This could be below 30% of the nominal rating.
TEMPERATURES
Main chamber: 750°C – can reach in excess of 1000°C*
Secondary chamber: 850°C – 1100°C*
LOAD CAPACITY
Up to 150kg*
ELECTRICAL SUPPLY
230 volt 16 amp
BURNERS
Fully automatic, high-efficiency burners with electronic ignition, flame recognition and combustion control devices fitted.
CONSTRUCTION
Steel welded fabrication consisting of sheet steel and structural section supports.
LOADING
Top loading design
ASH REMOVAL
Easy and safe manual ash removal from the primary chamber (ash doors available on request).
A mobile option is also available in Diesel only.

The VolkanPro150 is a compact and efficient, fast burning mixed waste stream incinerator.
The VolkanPro is extremely efficient at burning municipal waste and turning this waste to ash reducing its volume and also providing heat as a by-product. This waste stream is normally mixed and includes household, garden waste, street waste as well as retail and commercial waste.
The VolkanPro150 is a robust, highly efficient incineration system engineered to incinerate a variety of waste streams.
CONTROL
Fully automatic sequential control provided by internal PLC system providing control of:
secondary chamber pre-heat
burn cycle (variable)
cool down cycle
FUEL OPTIONS
Diesel
LPG
Natural Gas
FUEL CONSUMPTION
Diesel: 4-6lhr
LPG: 6-8lhr
Natural Gas: 7-9Nm³hr
BURN RATE
Up to 50kg per hour dependent upon loading method and actual calorific value of the waste. Fresh waste with a calorific value of 8Mjkg or better and less than 62% moisture will result in higher burn rates. Low calorific value or old waste will result in far lower burn rates. This could be below 30% of the nominal rating.
TEMPERATURES
Main chamber: 750°C – can reach in excess of 1000°C*
Secondary chamber: 850°C – 1100°C*
LOAD CAPACITY
Up to 150kg*
ELECTRICAL SUPPLY
230 volt 16 amp
BURNERS
Fully automatic, high-efficiency burners with electronic ignition, flame recognition and combustion control devices fitted.
CONSTRUCTION
Steel welded fabrication consisting of sheet steel and structural section supports.
LOADING
Top loading design
ASH REMOVAL
Easy and safe manual ash removal from the primary chamber (ash doors available on request).
A mobile option is also available in Diesel only.