HDPE Pleated Rod Type Pre Filter
Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.
SPECIFICATION
Efficiency Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type Available in flange or box type
Frame Material Standard model is constructed in Galvanized steel. Other models with Aluminium AnodizedStainless steel frame with or without powder coating are also available on order.
Filter Media HDPE and non-woven synthetic.
Gasket No Gasket is installed in standard filter model. Non-woven synthetiRubber gasket can be ordered on request
Separators None
Sealant PU based epoxy
Face Guard No face guard with standard model is supplied. On orderrequest filter can be protected with expanded mesh on both sides
Nominal Depth Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application Athlete Pre filters are most suited for:

HDPE Pleated Rod Type Pre Filter
Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.
SPECIFICATION
Efficiency Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type Available in flange or box type
Frame Material Standard model is constructed in Galvanized steel. Other models with Aluminium AnodizedStainless steel frame with or without powder coating are also available on order.
Filter Media HDPE and non-woven synthetic.
Gasket No Gasket is installed in standard filter model. Non-woven synthetiRubber gasket can be ordered on request
Separators None
Sealant PU based epoxy
Face Guard No face guard with standard model is supplied. On orderrequest filter can be protected with expanded mesh on both sides
Nominal Depth Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application Athlete Pre filters are most suited for: