Deep Groove Ball Bearings

Listing ID #809288

We are amongst dominant Manufactures, Exporters and Suppliers of Deep Grove Ball Bearings based in India. Single Row Deep Grove Ball Bearings accommodate radial and axial loads and are capable of operating at high speeds. Because of these capabilities and their competitive price, they are the most commonly used bearing type. The misalignment capacity of d Deep Grove Ball Bearings is limited therefore the alignment of the bearing locations must be carefully controlled.
Double Row Deep Grove Ball Bearings of the FAG Standard Programme have no filling slots. Contrary, to their former design they can carry axial loads in both directions. The cage of these bearings is of glass fiber reinforced polyamide 66, which will withstand constant temperatures of 120°C and can operate several hours at temperatures of up to 150°C, over short periods even at temperatures of up to 180°C. The bearings are filled with grease. Double Row Deep Groove Ball Bearings are not suitable when angular misalignments are to be accommodated.

Feature
They are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required.
Cages
Deep Groove Ball Bearings generally use pressed cages of steel sheet or brass cages. When the outer diameter is less than (inclusive)400mm, they use pressed cage with steel sheet. When the outer diameter is bigger than 400mm,they use brass cages.
Applications
Can be found in automobiles, machine tools, motors, instruments; construct machines, railway vehicles, agricultural machines and various other special machines
Types
Basic type, With snap ring groove on the outer ring(-N),With one shield(-Z) on one side or two shields(-2Z) on both sides, With one seal(-RS)on one side or two seals(-2RS)on both sides.