Features
DIN rail mountable
EightFour DC SSRs on a single board
Sink or Source input selection by jumper selection
LED indication for input signal
Semiconductor Fuse protection for short circuit and overcurrent.
Output points in two groups. Each group consists four op points.
Technical Specifications
Input signal voltage:20 VDC-28VDC, Typical voltage is 24VDC
Max. input current:20 mA @24VDC
Max. output voltage:100 VDC
Min.output voltage:5 VDC
Max. load per output point:5 Amp
Peak non repeatitive surge current:8 Amp
Input to output electrical isolation: 3.55 KV
Max. Voltage drop in output voltage: 2.5 V @ 2 Amp load
Switching ON delay:7 microseconds
Switching OFF delay:10 microseconds
Load type:Resistive and Inductive
Applications
a) For switching contactors from PLC outputs.
b) For switching DC loads like solenoid valves, DC actuators, Lamps, DC electromagnets in industrial use directly from controller outputs.
c) In all applications where we need very fast switching and require isolation between driver and driven circuits. The load can be inductive or resistive.
Available in 8 points and 4 points variants.
Solid State Relay boards with input signal other than 24VDC can be supplied on demand.
Caution: DO NOT USE SSR BOARD FOR SWITCHING AC SUPPLY !
StandardsApprovals
CE certified
PCB:IEC 61373
OptoisolatorTransistor:ULVDE
Connectors:CE
Profile and end plates:UL

Features
DIN rail mountable
EightFour DC SSRs on a single board
Sink or Source input selection by jumper selection
LED indication for input signal
Semiconductor Fuse protection for short circuit and overcurrent.
Output points in two groups. Each group consists four op points.
Technical Specifications
Input signal voltage:20 VDC-28VDC, Typical voltage is 24VDC
Max. input current:20 mA @24VDC
Max. output voltage:100 VDC
Min.output voltage:5 VDC
Max. load per output point:5 Amp
Peak non repeatitive surge current:8 Amp
Input to output electrical isolation: 3.55 KV
Max. Voltage drop in output voltage: 2.5 V @ 2 Amp load
Switching ON delay:7 microseconds
Switching OFF delay:10 microseconds
Load type:Resistive and Inductive
Applications
a) For switching contactors from PLC outputs.
b) For switching DC loads like solenoid valves, DC actuators, Lamps, DC electromagnets in industrial use directly from controller outputs.
c) In all applications where we need very fast switching and require isolation between driver and driven circuits. The load can be inductive or resistive.
Available in 8 points and 4 points variants.
Solid State Relay boards with input signal other than 24VDC can be supplied on demand.
Caution: DO NOT USE SSR BOARD FOR SWITCHING AC SUPPLY !
StandardsApprovals
CE certified
PCB:IEC 61373
OptoisolatorTransistor:ULVDE
Connectors:CE
Profile and end plates:UL