Listing ID #3519570
Company Information
Ask for more detail from the seller
Contact Supplierdam gate seals
we are leading manufacturer and supplier of best quality ptfe & teflon cladded dam gate seals. These dam gate seals are widely appreciated in market for the fine quality.
features:-
effective flexibility
cover the deficiencies.
Â
b) z and l type rubber seals
these z and l dam gate seals are moulded or extruded to the shape required and the sealing effect is obtained partly due to initial interference with the embedded sealing plate and partly due to the deflection under load. To ensure even tightening of seals and thus to avoid waviness of the deal, brass spacer tubes may be used. This type of seal is used on gates on the crests of dams and weirs.
Â
c) double bulb seal and stem dam gate seals
stem seal and double bulb seal is used for heads exceeding 30 m. The sealing will be obtained due to interference pressure between the seal seat and seal and also behind the seal in space between the seal base plates. The sealing bulb should project 6mm beyond the face of the clamps. The initial interference of 2 to 5mm the plane of the sealing bulb and sealing face of the seal seat is usually provided.
these seals may be used as top, bottom and side seals either by using them with water pressure acting them which is withdrawn before the gate is moved to reduce / eliminate friction load or they may be used with metal or flurocarbon film to achieve the same purpose. On heavy gates such seals may be well bottom seals where enough mechanical compression becomes available to make a good seal.