• Unique and Reliable Design of the Dalia Making Machines series pulverizers are highly effective as well as non stop continuous pulverizing process
• All contacting parts are non corrosive materials
• All Rotating parts are dynamical balanced for less vibration & higher performances
• Low temperature grinding technology thus the original ingredient cannot destroy
• Ideal for dry crushing
• Increased production leading to faster return on the investments
• Hardened & fully machined shelving type beaters thus less wear & Tear
• Single pieces grinding chamber no separate joints of fabrication for out late

Operating Principle of Dalia Making Machinery

The flow of material from the feeding hopper is regulating by means of side handle easily to suit the load. Rotor runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half of the crushing chamber, leaving a gap of 3 mm between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a 450 RPM. After the required size reduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)

• Unique and Reliable Design of the Dalia Making Machines series pulverizers are highly effective as well as non stop continuous pulverizing process
• All contacting parts are non corrosive materials
• All Rotating parts are dynamical balanced for less vibration & higher performances
• Low temperature grinding technology thus the original ingredient cannot destroy
• Ideal for dry crushing
• Increased production leading to faster return on the investments
• Hardened & fully machined shelving type beaters thus less wear & Tear
• Single pieces grinding chamber no separate joints of fabrication for out late

Operating Principle of Dalia Making Machinery

The flow of material from the feeding hopper is regulating by means of side handle easily to suit the load. Rotor runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half of the crushing chamber, leaving a gap of 3 mm between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a 450 RPM. After the required size reduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)