Cyanoacrylate Adhesive

The company is a highly trusted Supplier of Cyanoacrylate Adhesive in Bulandshahr. Being the distributor of Benson Polymers Ltd. for Cyanoacrylate Adhesive, the company procures and provides the very best all the time. The instant Cyanoacrylate Adhesives are available in different specialty grades like ethyl, methyl, etc. The different grades of the Cyanoacrylate Adhesive are available in varying cure speed, strength and viscosity. The best part of these Cyanoacrylate Adhesives is that they can form a strong bond with any combination of similar and dissimilar surfaces including rubbers, metals, plastic and more. The company also provides activators and aerosol to enhance the adhesion and cure speed to form a strong bond with plastic surfaces. The POLYFIX ® Cyanoacrylate Adhesives are easy to apply either manually or automatically. Easy application and rapid cure make the Cyanoacrylate Adhesives perfect for high speed production. 20 grams of Cyanoacrylate Adhesive, if applied properly, can form as many as hundreds of bonds. The Cyanoacrylate Adhesives have distinct advantages over other Cyanoacrylates. The Cyanoacrylate Adhesives offer exceptional product stability and faster cure speeds. Due to their ability to adhere to a wide range of substrates, the high strength Cyanoacrylate Adhesives can replace many different grades of both methyl and ethyl Cyanoacrylates. The company can provide Cyanoacrylate Adhesive as per the specific requirements of customers like curing speed, viscosity, blooming effect, etc.
Benefits :

• Very Quick Setting : Sets almost in seconds with very strong bonds
• Versatile : Able to bond a wide range of assembly materials like rubbers, metals, plastics, ceramic, stones, and hard wood
• No need of heating or mixing
• Cost Saving : Due to minimal consumption our Cyanoacrylate Adhesive saves a lot on the cost per unit. It doesn't require mechanical fasteners, expensive clamps, jigs, nails and fittings.

Uses :

• Electronic Industry : Our Cyanoacrylate Adhesive is widely used in electronic industry to manufacture watches, SMPS transformer, rubber moldings in refrigerators, logos on televisions, etc.
• Footwear Industry : Cyanoacrylate Adhesive has found numerous uses in shoe industry. It is used to bond variety of shoes and slippers. We supply different grades according to the requirement of our customers.
• Wooden Handicraft Industry : Wood has holes by nature and to repair them, water based wood adhesive is mixed with wooden powder to fill the holes. Our Cyanoacrylate Adhesive is directly used along with wooden powder to seal the wooden holes, minimizing the wastage of time and providing very strong bond.
• Stone Marble Handicraft : Cyanoacrylate Adhesive is widely used in making of marble and stone handicraft.
• Jewelry : Cyanoacrylate Adhesive is extensively used in manufacturing jewelry products to fix stones and diamonds in artificial and gold jewelry.
• Automobile Industry : Our Cyanoacrylate Adhesives have been successfully used in automobile industry to manufacture helmets, and air filters.
• Toys : In toys making, rapid joining of some toys pieces are required for which our Cyanoacrylate Adhesive has been largely used.
• Leather Industry : During the leather goods manufacturing, some fancy beads or designs need sudden bonding where Cyanoacrylate Adhesive has been proving successful.
• Signage, Flex, POP Material Manufacturers : Cyanoacrylate Adhesive is widely used in outdoor publicity to bond flex with iron frame and acrylic sheets.

Packing :
According to the requirements of customers, our Cyanoacrylate Adhesive is available in variety of packaging. We provide different varieties in designs of bottles, round and flat bottles. Along with the packaging we also provide extension nozzles that can be joined in front of the bottle so that the amount of Cyanoacrylate Adhesive coming out could be controlled. Our Cyanoacrylate Adhesive is available in :

• 20 Kilogram (Bulk Pack)
• 50 Grams (Plastic Bottle) : 50 gram bottles are packed individually and supplied 20 bottles in a box.
• 20 Grams (Plastic Bottle) : 20 grams bottles are packed in two sizes. The larger box contains 100 bottles while the small box contains 25 pieces in a box.
• 3 Gram (In Aluminum Tubes) : 3 gram aluminum tubes packing is further packed in fancy blister card of 12 pieces which is used for display in showrooms and shops.
• 2 Grams (In Aluminum Tubes/ Plastic Tubes both) : 2 gram aluminum packing is packed in fancy blister card of 12 pieces while 2 gram plastic tube is available in two options. They are either packed individually and then in Tin box or 50 tubes in plastic container for industrial uses
• 1 Gram (In Aluminum Tubes) : 1 gram aluminum tubes are packed in fancy blister card of 12 pieces to display in shops and showrooms
• 500 mg (In Plastic Tubes) : 500 mg pouches are available for consumer market to be displayed in showrooms and shops

Health Hazard Data :
Our Cyanoacrylate Adhesive is not included in any list for carcinogenicity. Possible routes of entry for the adhesives include skin and ingestion. This Cyanoacrylate Adhesive gives a virtually immediate and strong bond; apply only to one surface to be bonded. Do not apply the Cyanoacrylate Adhesive on your skin or other parts of your body, or that of others. In case of body contact, flush with water. Seek medical attention for any eye or internal contact.
Warning :

• Eye irritant
• Bonds skin in seconds

Effects :

• Eye Contact : Cyanoacrylate Adhesives are eye irritants and tissue bonders. Anyone using it should take extreme care. Precautions should be taken like use of goggles, in order to avoid eye contact. In case the Cyanoacrylate Adhesive comes in contact with the eye, the eyes should be continuously washed with water for some time and the person should be provided medical aid immediately. If eye lids are bonded closed, no one should attempt to separate them except a qualified physician. In case of bonding corneal surface, forced separation is not recommended at all. Leave the eye to remain closed and allow the bond to separate naturally, which usually occur within a few days.
• Skin Contact : Cyanoacrylate Adhesives are mild irritants to the skin. Though relatively non-toxic, they quickly form strong bonds between adjacent skin surfaces, e.g. fingers. To separate them, the bonded part should be soaked in warm and soapy water for sufficient time and then the bond should be gently peeled off. Alternatively, a dull instrument such as a table knife or a thin wire can be forced through the bond. Solvents like acetone or nail polish remover can also be used but with appropriate caution. In case the Cyanoacrylate Adhesive is spread over a large skin area; that part of the skin should be flushed with large amounts of water. To wipe off excess adhesive, a soaking wet cloth can be used. If the adhesive has soaked through clothing, use huge amount of water to flush the involved area. If the cloth has bonded to the skin, the skin can be damaged if the bonded clothing is attempted to be removed without these precautions. The Cyanoacrylate Adhesive will automatically flake off from the skin within a day or so.
• Oral Contact : Though Cyanoacrylates Adhesives are relatively non-toxic, rapid polymerization (hardening) of the adhesive will take place if they come in contact with the surfaces of the mouth. The mouth should be continuously flushed with water and medical aid should be provided immediately. In case lips are bonded, hot water or solvent can be used to gently peel apart the Cyanoacrylate Adhesives.