Cupro Nickel Pipes

The company is one of the renowned Manufacturers, Exporters and Suppliers of Cupro Nickel Pipes in Mumbai (India). The Cupro Nickel Pipes are also known as the Cupro Nickel Tubes in the industrial sector. The company produces a vast range of Cupro Nickel Pipes to satisfy all customers̢۪ requirements in terms of outer diameter, wall thickness and tempers to suit the intended applications. The Cupro Nickel Pipes are available in a variety of combinations.
Range Of Cupro Nickel Pipes/Tubes

• Cupro Nickel Tubes 90/10
• Cupro Nickel Tubes 70/30

Standards

• Cupro Nickel Tube 90/ 10
  • Standard BS2871
  • Part 3 ASTM B-11
  • IS 1545
  • JIS H 3300
  • NFA 51 102
  • Symbols
    • CN 102 C 70600
    • CuNi10Fe1
    • C7060
    • CuNi10Fe1Mn
• Cupro Nickel Tubes70/30
  • Standard BS2871
  • Part 3 ASTM B-111
  • IS 1545
  • JIS H 3300
  • NFA 51 102
  • NFA 51 102 CN 107 C 71500
  • Symbols
    • CuNi30Mn1Fe
    • C 7150
    • CuNi30Mn1Fe

Dimensional Range

• Outer Diameter : 4.00 to 22.00 mm
• Wall Thickness : Between 0.15mm and 1.50 mm
• Length : Up to 6 meters

End Applications

• Heat Exchangers
• Oil Coolers
• Radiators
• High Capacity Power Plants
• Ship Building & Ship Repairs
• Condensers
• Offshore Oil Rigs
• Distiller Tubes
• Evaporators
• Ferrules

Cupro Nickel Tubes 90/10
This form of Cupro Nickel Tubes possesses excellent resistance to corrosion by sea water as well as high resistance to erosion corrosion and air-impingement attack. The addition of iron results in 90/10 performing as well as 70/30 in salt water service heat exchangers. These Cupro Nickel Tubes have good strength and ductility at ordinary temperatures and relatively high strength and other mechanical properties at elevated temperatures.
These Cupro Nickel Tubes are widely used in condensers, coolers and heat exchangers where resistance to corrosion and erosion is paramount, yet maintaining a high thermal conductivity rate. Cupro Nickel Tubes are to be used preferably in marine conditions. The Cupro Nickel Tube forms a protective film which is multi-layered in flowing seawater and resists marine bio-fouling.
These Cupro Nickel Tubes are produced in a range of outside diameter, wall thickness various temper conditions to achieve the required mechanical properties and grain size. The mechanical and dimensional characteristics of Cupro Nickel Tubes satisfy the most demanding orders that require tight tolerances.
Cupro Nickel Tubes 70/30
The company produces smooth bore 70/30 Cupro Nickel Tubes of the highest standard, rigorously tested to make sure they are suitable for the exacting requirement of condensers and heat exchangers. These Cupro Nickel Tubes have the highest resistance to stress-corrosion cracking. These Cupro Nickel Tubes are available in a variety of outside diameter, wall thickness and tempers to meet the requirement. Superior dimensional control with specified mechanical properties offers trouble free performance and cost savings.
This form of Cupro Nickel Tubes gives the best service life under the most adverse conditions because of improved corrosion resistance and almost insensitivity to stress corrosion. These Cupro Nickel Tubes are used in heat exchangers where severe erosion and corrosion are experienced, especially at elevated temperatures, high velocities and extreme turbulence of the circulating media. These Cupro Nickel Tubes have an important bearing not only on the performance of heat exchangers but also on the cost and delivery cycle time of the condenser and heat exchangers where they are used.