Avail from us Corona Treater For Monolayer that is used for the treatment on plastic film. We manufacture Corona Treater For Monolayer from quality-tested IGBT & Electronic Items. The Corona Treater For Monolayer has high frequency and is used for increasing surface tension in plastic extrusion film & printing. The latest technology Corona Treater For Monolayer can be availed at reasonable price from us. We are a well-recognized Manufacturer, Exporter and Supplier of Corona Treater For Monolayer. Sizes Available

• 600 mm
• 700 mm
• 800mm
• 900 mm
• 1000 mm
• 1100mm

• Main supply : 220VAC single phase 3 wire + 5%
• Mains frequency : 50Hz +5%
• Power dissipation : 1.5Kw
• Output frequency : 18khz to 60khz
• High frequency generator : By using latest German technology IGBT & IGBT driver.
• Indication : Audio alert at the time of start, Load Amps, main on corona start, audio & visual alarm at the time of tripping
• Control : Power control by potentiometer corona start / stop, Pneumatic on/off, Maximum power lock adjustment.
• Protection : Rotation control via inductive sensor, Corona can not be start at the time when door is open, Over load protection, Dynamic short circuit protection at IGBT input shutdown, Under voltage/ Over voltage shut down input.
• Hazardous area : No, Integrated potential free power supply for IGBT driving, Drive inter lock top /bottom
• Power output : 1.5kw
• Power consumption : 1.6kva ( at full load )
• Power line voltage : 220v /50Hz / 1ph
• I.G.B.T. Used : Germany Infinion mack 150A1200v block
• Driver : S.M.D. Fully inter locked top / bottom Low voltage & high voltage shutdown
• Alarm : Audio & visual alarm at the time of trip condition
• Colour : semence gray
• Rotation control : via inductive sensor
• Power regulation : manually by potentiometer
• Measurements
  • Generator 520x200x480 (LxWxH )
  • Hp-transformer 230x230x330 (LxWxH)

• Treatment : Double sided with two electrode
• Electrode pivoting : pneumatic
• Treatment width : 550mm
• Roll length : 600mm
• Type of electrode : 1pcs. FOUR snapped(F.S)
• Diameter of backing rolls : 50mm
• Roll/ covering : Aluminum/ including silicon sleeves Exchangeable silicon sleeve)

Avail from us Corona Treater For Monolayer that is used for the treatment on plastic film. We manufacture Corona Treater For Monolayer from quality-tested IGBT & Electronic Items. The Corona Treater For Monolayer has high frequency and is used for increasing surface tension in plastic extrusion film & printing. The latest technology Corona Treater For Monolayer can be availed at reasonable price from us. We are a well-recognized Manufacturer, Exporter and Supplier of Corona Treater For Monolayer. Sizes Available

• 600 mm
• 700 mm
• 800mm
• 900 mm
• 1000 mm
• 1100mm

• Main supply : 220VAC single phase 3 wire + 5%
• Mains frequency : 50Hz +5%
• Power dissipation : 1.5Kw
• Output frequency : 18khz to 60khz
• High frequency generator : By using latest German technology IGBT & IGBT driver.
• Indication : Audio alert at the time of start, Load Amps, main on corona start, audio & visual alarm at the time of tripping
• Control : Power control by potentiometer corona start / stop, Pneumatic on/off, Maximum power lock adjustment.
• Protection : Rotation control via inductive sensor, Corona can not be start at the time when door is open, Over load protection, Dynamic short circuit protection at IGBT input shutdown, Under voltage/ Over voltage shut down input.
• Hazardous area : No, Integrated potential free power supply for IGBT driving, Drive inter lock top /bottom
• Power output : 1.5kw
• Power consumption : 1.6kva ( at full load )
• Power line voltage : 220v /50Hz / 1ph
• I.G.B.T. Used : Germany Infinion mack 150A1200v block
• Driver : S.M.D. Fully inter locked top / bottom Low voltage & high voltage shutdown
• Alarm : Audio & visual alarm at the time of trip condition
• Colour : semence gray
• Rotation control : via inductive sensor
• Power regulation : manually by potentiometer
• Measurements
  • Generator 520x200x480 (LxWxH )
  • Hp-transformer 230x230x330 (LxWxH)

• Treatment : Double sided with two electrode
• Electrode pivoting : pneumatic
• Treatment width : 550mm
• Roll length : 600mm
• Type of electrode : 1pcs. FOUR snapped(F.S)
• Diameter of backing rolls : 50mm
• Roll/ covering : Aluminum/ including silicon sleeves Exchangeable silicon sleeve)