Polished Copper Corrosion Bath, For Laboratory

The instrument is designed and made as per the National Standard for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test. It is suitable to determine the corrosiveness to copper of aviation gasoline, aviation turbine fuels, automotive gasoline, natural gasoline or other hydrocarbons having a Reid vapor pressure no greater than 124 kPa, cleaners solvent, kerosene, diesel fuel, distillate fuel oil, lubricating oil, and other petroleum products. The instrument has the function of temperature controlling, timing and alarming.
Used for detecting the presence of corrosive sulpher in petroleum products. The apparatus consists of a bath either dual purpose (500C & 1000C) or a boiling bath (1000C only) without stainless steel and copper strips of definite size 6 bombs or 18 test tubes can be accommodate in each type of bath with different temperature regulation system to operate on 220 volts AC. mains.
Units can be used to test samples that do not require a test such as diesel fuel, fuel oil, automotive gasoline, Stoddard solvent, kerosene and lubricating oil. Temperature controller has a °C/°F switchable digital set point and display (As per model.). Bath is fully insulated and features welded stainless steel double-wall construction with built-in support rack. Equipment is protected by an over temperature control circuit which automatically interrupts power to the unit should bath temperature exceed programmed cutoff point.
Features :

• Power supply: 220 V± 10%, 50 Hz
• Temperature sensor: Industrial platinum resistance, scale number is PT100.
• Temperature controlling range: Room temperature to 1000C (temperature will be vary as per requirements.)
• Temperature controlling accuracy: ± 10C
• Temperature display mode: LED display
• Main heating power: 600 W
• Auxiliary heating power: 1000 W
• Time controlling range: 1 min24 hours
• Time display mode: LED display
• Sample hole: 4
• Sample tested at one time: 412 pieces
• Ambient temperature: Room temperature 350 C
• Relative humidity: ≤ 85%
• Total Power supply: Not more than 1800 W
• Microprocessor based PID temperature controller for accurate temperature controlling.