Conveyor Belts

With our know-how and latest equipment in the industry, we are engaged in offering the best range of Conveyor Belts. Being an admirable Manufacturer and Supplier, we try to live up to our reputation. Different types of conveyor belts are available for conveying different material like PVC and rubber. Their excellence is tallied to the quality as required by industrial standards. Get in touch to avail them at pocket friendly price.
More About Conveyor Belts

• A belt conveyor system consists of two or more pulleys (sometimes referred to as drums), with an endless loop of carrying medium—the conveyor belt—that rotates about them. One or both of the pulleys are powered, moving the belt and the material on the belt forward.
• There are two main industrial classes of belt conveyors; Those in general material handling such as those moving boxes along inside a factory and bulk material handling such as those used to transport large volumes of resources and agricultural materials, such as grain, salt, coal, ore, sand, overburden and more.
• Today there are different types of conveyor belts that have been created for conveying different kinds of material available in PVC and rubber materials.
• The belt consists of one or more layers of material. Many belts in general material handling have two layers. An under layer of material to provide linear strength and shape called a carcass and an over layer called the cover. The carcass is often a woven fabric having a warp & weft. The most common carcass materials are polyester, nylon and cotton. The cover is often various rubber or plastic compounds specified by use of the belt. Covers can be made from more exotic materials for unusual applications such as silicone for heat or gum rubber when traction is essential.

Speed

• Material handling belt conveyors : 1.5m/s
• Conveyors with magnetic separator/detector : To suit response time
• Packed cement bags : 1.0m/s

Troughing Angle

• Carrying side : 3 Rollers with 45 deg. troughing angle except for Packing Plant Conveyors which shall be with flat idlers.
• For non magnetic idlers, the centre idler frame shall be with 15 degree troughing angle and idler frames on either side shall have 45o troughing angle.      
• Return side : Flat idlers

Drive

• Drive shall be provided at head end as far as possible
• Bevel Helical gear box shall be provided
• Combined base frame with suitable fasteners shall be provided for housing motor and gearbox.

Idlers

• Material : MS ERW rollers and MS bars for shafts.      
• Sealing : Double labyrinth seal on external side and contact nylon seal on inner side. On the outer side of the roller face, an additional water proof neoprene rubber contact lip seal shall be provided.      
• Bearings and Lubrication :
  
  • Antifriction ball bearings/ seize resistant bearings & life long lubricated.
  • Bearing housing shall be CRCA sheet of 3.15 mm thickness of EDD quality.      

• Carrying and Return Trainers : Mounted on thrust bearings for swivel arrangement with necessary stoppers.
• Transition Idlers : One set each before tail and head end. Each set consisting of minimum 2 no. 20 degree troughing idler.

Belting

• Nylon/Nylon belting shall be provided.
• The rating of the belt should be such that the maximum tension induced in the belt should not exceed 80% of the maximum recommended belt tension.
• The rating and duty conditions shall be decided on the maximum tension anticipated in the belt, max. belt width for adequate load support, min. belt width for adequate troughing.
• Heat resistant belting shall be provided for clinker conveyors and wherever the material temperature(normal or maximum) exceeds 80 deg.