Listing ID #3851767
Company Information
Ask for more detail from the seller
The meter is used on sites exposed to rain, dust, and robust handling. Basically, it comes in two parts i.e. Meter & Sensor.
Sensor: It is the sensing element of meter, which senses the conductivity and sends the signal to the meter.
Meter: This is the unit that processes the information received from the sensor and displays the actual conductivity in the line.
TROUBLE
PROBABLE CAUSE
ACTION
DURING COMMISSIONING
Fluctuating Reading
Sensor not dipped in the line properly
Loop the outlet tubing such that the tee always remains
Wrong wiring
Connect the wires as per drawing
DURING NORMAL SERVICE
Display Shows Erroneous Reading
Sensor not dipped in the line .properly
Loop the outlet tubing such that the tee always remains flooded with water
Deposition on the sensor
Remove the sensor and clean it with Polish paper
No Display
High Voltage
Check MOV/ FUSE, if it is burnt then replace it with new one
Frequent Fuse failure
MOV short
Replace MOV* As well as FUSE**
By clicking Get Quotes Now, I accept the T&C and Privacy Policy.
Connect with us