Perma Floor Seal
 
CONCRETE FLOOR DUST PROOFER AND HARDENER
DESCRIPTION
Even the best concreted industrial floors loose their looks because of surface weakness and dusting. A small care such as use of a dust proofer and floor hardener on new floor at a very nominal cost ensures long life and good looks to an industrial floor. Perma Floor Seal is a micro Concrete  Dust Proofer which is diluted with water and applied on the floors to get the desired dust proof and healthy performance of floors.
PRIMARY USES

• To make the floor surface hard, durable and dust proof.
• Suitable for:
• Factory Floors
• Garages
• Industrial units
• Warehouses and transit sheds
• Generator rooms

ADVANTAGES
Both new as well as old floors can be treated with Perma Floor Seal. Perma Floor Seal makes the surface strong and durable. Perma Floor Seal makes the surface dust proof. There is no need for surface preparation and curing. The floor can be open to traffic even during treatment. It improves chemical resistance of the floor.
DIRECTIONS FOR USE

• Perma Floor Seal is applied on cleaned concrete floors in three coats with 12 hours intervals between coats.
• Dissolve 1 kg of Perma Floor Seal crystals in 6 litres of water and apply by brush, mop or just flood the surface.
• After 12 hours dissolve 1 kg of Perma Floor Seal Crystals in 3 Litres of water and apply as stated above.
• After 12 hours repeat operation (2) above.
• After 12 hours clean the surface with clean water and put it to use.

ACTION
Perma Floor Seal crystals when dissolved in water and applied on concrete surface, penetrates deep into the concrete through the capillaries and reacts with calcium oxide in cement to form non soluble crystals. These crystals effectively block the capillaries and effectively fill up all the surface pores making the whole concrete dense. This minimises penetration of chemical spillages etc. into concrete thus making it weak. The pore blocked surface becomes dust free.
COVERAGE
1st Coat 250 gms/100 sq.ft. subsequent coats 400 gms/ 100 sq.ft. For three coats 1 kg covers 100 sq.ft.
HEALTH AND SAFETY
Perma Floor Seal produces a strong alkaline solution. Eyes and skin should be protected from splashing. Contact with skin should be washed with plenty of water. If eyes are affected clean with adequate running water and seek medical help. During treatment hand gloves and gum boots are recommended.
PACKING
Perma Floor Seal is available in 25 kg HDPE sack.
SHELF LIFE
Perma Floor Seal has a shelf life of 24 months if kept in cool and dry conditions.

Perma Floor Seal
 
CONCRETE FLOOR DUST PROOFER AND HARDENER
DESCRIPTION
Even the best concreted industrial floors loose their looks because of surface weakness and dusting. A small care such as use of a dust proofer and floor hardener on new floor at a very nominal cost ensures long life and good looks to an industrial floor. Perma Floor Seal is a micro Concrete  Dust Proofer which is diluted with water and applied on the floors to get the desired dust proof and healthy performance of floors.
PRIMARY USES

• To make the floor surface hard, durable and dust proof.
• Suitable for:
• Factory Floors
• Garages
• Industrial units
• Warehouses and transit sheds
• Generator rooms

ADVANTAGES
Both new as well as old floors can be treated with Perma Floor Seal. Perma Floor Seal makes the surface strong and durable. Perma Floor Seal makes the surface dust proof. There is no need for surface preparation and curing. The floor can be open to traffic even during treatment. It improves chemical resistance of the floor.
DIRECTIONS FOR USE

• Perma Floor Seal is applied on cleaned concrete floors in three coats with 12 hours intervals between coats.
• Dissolve 1 kg of Perma Floor Seal crystals in 6 litres of water and apply by brush, mop or just flood the surface.
• After 12 hours dissolve 1 kg of Perma Floor Seal Crystals in 3 Litres of water and apply as stated above.
• After 12 hours repeat operation (2) above.
• After 12 hours clean the surface with clean water and put it to use.

ACTION
Perma Floor Seal crystals when dissolved in water and applied on concrete surface, penetrates deep into the concrete through the capillaries and reacts with calcium oxide in cement to form non soluble crystals. These crystals effectively block the capillaries and effectively fill up all the surface pores making the whole concrete dense. This minimises penetration of chemical spillages etc. into concrete thus making it weak. The pore blocked surface becomes dust free.
COVERAGE
1st Coat 250 gms/100 sq.ft. subsequent coats 400 gms/ 100 sq.ft. For three coats 1 kg covers 100 sq.ft.
HEALTH AND SAFETY
Perma Floor Seal produces a strong alkaline solution. Eyes and skin should be protected from splashing. Contact with skin should be washed with plenty of water. If eyes are affected clean with adequate running water and seek medical help. During treatment hand gloves and gum boots are recommended.
PACKING
Perma Floor Seal is available in 25 kg HDPE sack.
SHELF LIFE
Perma Floor Seal has a shelf life of 24 months if kept in cool and dry conditions.