Listing ID #4144284
Company Information
Ask for more detail from the seller
Contact Supplier
|
||||||
Condensed moisture together with dust and oil in compressed air leads to emulsion formation causing following troubles: If the temperature of the compressed air is more then 40o C then it is necessaroy to provide AFTER COOLER which should ensure the outlet temperature of 400C. During this cooling process, some moisture condenses which is removed our from prefilter. If the Air compressor is non-lubricated type then there is no need of Activated Carbon Filter, but if the Air Compressor is lubricated type them Activated Carbon Filter before Compressed Air Dryer / heatless air dryer is must. The characteristic of Activated Carbon is to remove the oil vapour totally from the compressed air. This ensure the full life of the desiccant in Compressed Air Dryer / Heatless air dryer . The HEATLESS type Air Dryer is the simplest & Economical Air Dryer with Activated Alumina Molecular Sieves as the desiccant. The twin Absorbers of Air Dryer is filled with these desiccant and is assembled with 3-way, 2-way, control valves and interconnected pipings. The Air Dryer / instrument air dryer follows the Drying sequence of 10 minutes. Here one absorber of dessicant air dryer is under drying cycle for 5 minutes and simultaneously the other absorber of air dryer under goes for regeneration and equalization process for (4 + 1) 5 minutes respectively. The changeover of the absorber takes place with the help of sequence timer. The moistured air and regenerative air is drained out through the individual silencer of the absorbers provided at the bottom hence super Dry Air comes from the top of the Absorber & is taken to your process for your applications. During this cooling process, some moisture condenses which is removed from prefilter. |