Listing ID #3826032
Company Information
Ask for more detail from the seller
Contact SupplierThe hybrid cards have more than two technologies embedded inside a single smart card. These cards use any two of the below mentioned types of smart cards in a single chip. Some applications of smart card require more than two technologies like the proximity card and the Mifare card integrated in a single chip.
DescriptionThe hybrid cards have more than two technologies embedded inside a single smart card. These cards use any two of the below mentioned types of smart cards in a single chip. Some applications of smart card require more than two technologies like the proximity card and the Mifare card integrated in a single chip.
Hybrid cards have multiple chips in the same card.
These are typically attached to each interface separately with the following other features we provide:
♦ Substrate material is PVC.
♦ Dimension: CR80 standard credit card size (3.375” * 2.125”)
♦ Personalization: As per client’s requirement.
♦ Embossing: As per client’s requirement.
♦ Barcode: As per client’s requirement.
Types of Hybrid cards available are:
1. Dual inlay HF + LF cards (IDT HF-LF)
2. Dual inlay HF + UHF cards (IDT HF-UHF)
3. Dual inlay LF+ UHF cards (IDT HF-UHF)
1. Specifications of LF
♦ 4 Layer card
♦ Glossy finish
♦ Thickness: 760 microns
♦ TK4100 Chip
♦ Frequency- 125 KHz
♦ Chipset EM 4100/12
2. Specifications of HF:
♦ Operating frequency 13.56 MHz
♦ Thickness 760 microns
♦ Memory 1024 bits or 1024 bits*8
♦ 1K bytes EEPROM or 4K Bytes EEPROM
♦ Range of operation: about 2.5” to 3.9”
♦ Data rate: 106 kbits/s
♦ True anti-collision
♦ 4 bytes serial number UID
♦ 8K bits, organized in 16 sectors with 4 blocks each, and 16 bytes in each block
♦ Data retention of 10 years minimum
♦ Write/ erase endurance 100,000 cycles minimum
♦ 3- pass authentication: ISO/IEC DIS-9798 -2 or ISO/ IEC 14443A
3. Specifications of UHF:
♦ HIGGS TM-3 IC with 800 bits of non volatile memory
♦ Operating frequency 8566 MHz
♦ Aln 9662
♦ 32-bit TID 64- bit unique TID 96 bit EPC memory, extensible to 480- bits
♦ 512- bit user memory
♦ 32- bit Access password
♦ 32- bit Kill password
♦ Pre- programmed with a unique, unalterable 64-bit serial number
Applications:
Accommodates legacy system infrastructure while adding applications that require different e-card technologies.