Listing ID #4133633
Company Information
Ask for more detail from the seller
Contact SupplierBuildWell colour putty is a wall putty with added advantage of shades like Pink, Yellow, Green and Off-White, especially developed to provide smooth finish on plastered surface. It contains finest quality minerals, polymers, white cement and pigments. Since it comes in shades, no painting required for interior to attain highest economy and speed. It can also be used for application areas like basement parking lot, staircase etc. as “Final Finish”.
application
Dampen the surface to be plastered with clean water. Allow excess water to drain off. Using a steel trowel/blade, apply the above mix to a thickness of about 0.5 – 1 mm. Level and smoothen the surface. Cure the first coat lightly after it dries. Apply the second coat of 0.5 – 1 mm after the first coat has fully dried and set. In areas of high temperature and low humidity light curing for two days is recommended. The thickness of each coat should not exceed 1 mm and total plaster thickness should not exceed 2 mm. Smoother with a steel trowel, Sand paper if so desired with 600 no. of sand paper.
PROPERTY | TYPICAL RESULTS | SINGAPORE HDB STD |
---|---|---|
Physical Appearance | Colour | - |
Setting Time : Initial | 270 Min | > = 30 Min |
Setting Time : Final | 300 Min | < = 600 Min |
Tensile Adhesion Strength | 0.84 Mpa | Min 0.8 Mpa |
Compression Strength | 7.12 Mpa | 7 - 12 Mpa |
Flexural Strength | 1.89 Mpa | - |
Water Retentivity | 99.60% | > = 95 % |
Water Absorption | 0.04 kg/m2 | WO - No Requirement |
W1 - 0.26 kg/m2 | EN 1015 - 18 & EN 998-1-2003 | |
W2 - 0.13 kg/m2 | EN 1015 - 18 & EN 998-1-2003 |