Labtro Pentex Micrscope with Five Head Observation System.
Trinocular observation head inclined at 30° rotatable at 360° (One set)
Vertical phototube for micro photography
Binocular observation heads inclined at 30° fixed on adjustable stands. (Four Sets)
OBJECTIVES (ANTI MOLD)
Labtro pentex microscope has optical system and new dedicated objectives produce high quality images 
Our pentex five heads has High-quality images with newly developed high-intensity LED illumination, providing uniform Objective lenses for flat images.
CCIS Plan Achromatic 2X
CCIS Plan Achromatic 4X
CCIS Achromatic 10X
CCIS Achromatic 40X (S.L.)
CCIS Achromatic 100X Oil (S.L.)

ILLUMINATOR

Koehler's illumination system with 24V-100W halogen lamp, adjustable brightness.
Labtro pentex microscope light source (110 / 220 volts) used in place of a mirror. Microscope has a mirror, it is used to reflect light from an external light source up through the bottom of the stage.

SUB STAGE CONDENSER

Swing out top lens. Condenser N.A 0.9/1.25 with swing out filter holder. Iris diaphragm.
Labtro microscope flat platform where you place your slides. Stage clips hold the slides in place. Microscope has a mechanical stage, microscope move the slide around by turning two knobs. Microscope accuracy knob moves it left and right, the other moves it up and down.

Labtro microscope lens at the top that you look through. They are usually extra wide field 10X (paired), F.O.V. 22mm.Ocular dia 30mm.
Labtro microscope eyepiece, is a type of lens that is attached to a variety of optical devices such as microscopes
Microscope Arm: Supports the tube and connects it to the base

Labtro microscope mechanical tube length of an optical microscope is defined as the distance from the nosepiece opening, where the objective is mounted, to the top edge of the observation tubes microscope the eyepieces (oculars) microscope tube length for a typical transmitted light microscope.
Co-axial focusing control with large knob, Pre focusing lever and tension adjustment ring.
Reverse angle sextuple nosepiece revolving on ball bearings.
Mechanical stage size 185mmX142mm and having low positioned co-axial controls on ball bearing guide ways.

Tube: Connects the eyepiece to the objective lenses POINTER

Dual color LED pointer, brightness adjustable.
STANDARD ACCESSORIES
Blue and grey filters, LED bulb, halogen bulb 24V/100W, operating manual, dust cover, guarantee card, Styrofoam boxes.

Labtro Pentex Micrscope with Five Head Observation System.
Trinocular observation head inclined at 30° rotatable at 360° (One set)
Vertical phototube for micro photography
Binocular observation heads inclined at 30° fixed on adjustable stands. (Four Sets)
OBJECTIVES (ANTI MOLD)
Labtro pentex microscope has optical system and new dedicated objectives produce high quality images 
Our pentex five heads has High-quality images with newly developed high-intensity LED illumination, providing uniform Objective lenses for flat images.
CCIS Plan Achromatic 2X
CCIS Plan Achromatic 4X
CCIS Achromatic 10X
CCIS Achromatic 40X (S.L.)
CCIS Achromatic 100X Oil (S.L.)

ILLUMINATOR

Koehler's illumination system with 24V-100W halogen lamp, adjustable brightness.
Labtro pentex microscope light source (110 / 220 volts) used in place of a mirror. Microscope has a mirror, it is used to reflect light from an external light source up through the bottom of the stage.

SUB STAGE CONDENSER

Swing out top lens. Condenser N.A 0.9/1.25 with swing out filter holder. Iris diaphragm.
Labtro microscope flat platform where you place your slides. Stage clips hold the slides in place. Microscope has a mechanical stage, microscope move the slide around by turning two knobs. Microscope accuracy knob moves it left and right, the other moves it up and down.

Labtro microscope lens at the top that you look through. They are usually extra wide field 10X (paired), F.O.V. 22mm.Ocular dia 30mm.
Labtro microscope eyepiece, is a type of lens that is attached to a variety of optical devices such as microscopes
Microscope Arm: Supports the tube and connects it to the base

Labtro microscope mechanical tube length of an optical microscope is defined as the distance from the nosepiece opening, where the objective is mounted, to the top edge of the observation tubes microscope the eyepieces (oculars) microscope tube length for a typical transmitted light microscope.
Co-axial focusing control with large knob, Pre focusing lever and tension adjustment ring.
Reverse angle sextuple nosepiece revolving on ball bearings.
Mechanical stage size 185mmX142mm and having low positioned co-axial controls on ball bearing guide ways.

Tube: Connects the eyepiece to the objective lenses POINTER

Dual color LED pointer, brightness adjustable.
STANDARD ACCESSORIES
Blue and grey filters, LED bulb, halogen bulb 24V/100W, operating manual, dust cover, guarantee card, Styrofoam boxes.