Listing ID #4305045
Company Information
Ask for more detail from the seller
Contact SupplierMODEL NO- ILUX –EM -06 CHILLED WATER FLOW METER
Principle of Operation
Faraday's Law The operation of a magnetic flow meter or mag meter
is based upon Faraday's Law, which states that the voltage induced
ross any conductor as it moves at right angles through a magnetic
field is proportional to the velocity of that conductor.
Faraday's Formula
E is proportional to V x B x D where:
E = The voltage generated in a conductor
V = The velocity of the conductor
B = The magnetic field strength
D = The length of the conductor
Application :
Electromagnetic Chilled Water Flow Meter
Sensor Output:
Pulse;4~20mA;HART;RS485;MODBUS;GPRS
Lining and Body Matereial
PTFE, Rubber Lining and cast
steel; stainless steel body material
Production Name |
ILUX –EM -06 CHILLED WATER FLOW METER |
Medium |
water; waste water; Mud and various kinds of conductivity liquid |
Diameter |
DN10~DN2000mm |
Accuracy |
+/-0.5% |
Temperature |
<80℃(rubber); <180℃(PTFE) |
Pressure |
10 kg/cm² Max (Higher on Request) |
Flow speed |
0.3~10m/s |
Requirement of pipeline |
Upstream ≥5DN;Downstream≤10DN |
Electrode |
Stainless steel 316L(standard); Titanium; Tantalum ; Hast alloy |
Lining |
PTFE; Rubber |
Connection |
Flange; thread; clamp on |
Body material |
Cast steel ;stainless steel |
Power supply |
220V;24V;Battery |
Output |
Pulse;4~20mA;HART;RS485;MODBUS;GPRS |
Communication |
HART;RS485;MODBUS |
Explosion proof |
Customized |
Protection |
IP65 or IP67 |
Environment |
Environment:-20~60℃ |
ITEM |
ELECTRODE SPECIFICATION |
Material |
The Medium |
SS316L |
Water; Waste water; Corrosive water and Mud, etc; |
Hastelloy B |
Non-oxidizing acids at concentrations less than 10%; NAOH Concentrations less than 50% |
Hastelloy C |
Mixed Acid and Oxidizing salts |
Titanium |
Salt and weak acid ;Not application: hydrochloric acid, nitric acid and other reducing acids |
Tantalum |
Hydrochloric acid(<40%); Sulphuric acid and Other oxidizing acids |
Platinum |
Almost all acid-base salt solution But not application for aqua regia, except ammonium salt |
Tungsten carbide |
Pulp ; sewage ;slurry |
FLOW METER LINNING SPECIFICATION
Lining |
Name |
Symbol |
Performance |
Temp |
Medium |
|
Rubber |
Neoprene |
CR |
Normal wear resistance acid salt |
<80c |
Water |
|
Polyurethane |
PU |
Good wear resistance , bad corrosive resistance |
<80c |
Pulp |
|
|
Fluoroplastic |
Teflon |
PTFE |
Acid Salt with stable Chemical properties |
<140c |
Acid Salt |
|
Polyvinyl Fluoride |
FEP |
Chemical properties same |
<180c |
Acid Salt |
|
Flow Meter Installation
1. Installation location
Flow Sensor Installation