Listing ID #1468167
Company Information
Ask for more detail from the seller
Contact SupplierCustomers can obtain our range of Flat Plate Collector Solar Water Heater (200 LPD). We fabricate the Solar Water Heater in adherence to norms set by industrial regulatory bodies. We are capable of delivering small or bulk orders of Solar Water Heater to our buyers in domestic and international markets.
Material & Thickness |
Stainless Steel – 304/GRP/Boiler grade steel. |
---|---|
Type |
Cylindrical – horizontally assembled. |
Size |
Ø360, Length 1800. |
Insulation |
P U F.40-50mm. |
Outer Cladding |
Pre coated galvanized Steel/Aluminum. |
Outer Finishing |
Pure Polyester Powder Coating finish. |
Outer Finish Color |
Golden Yellow & Black combination. |
Back up Heater |
2 KW With thermostat control 230V AC. |
Tank Supports |
Fabricated and powder coated M.S. Tube |
Tank Testing |
Factory pressure tested for normal systems is at 2 Kg/cm². |
Normal Working pressure of the system |
Less than 1 Kg/cm². |
Interconnection Tank and Collector |
EPDM Pipe |
No. of Collectors |
02 No. |
Type |
Copper, selectively coated with “NALSUN” Black Chrome coating. |
Size |
2080mm L x 1050mm W x 100mm H |
Absorber Material |
Copper - Copper absorber. |
No. of Fins |
9 No’s per collector |
Header Tubes |
Copper, Ø25 mm, 22 SWG. |
Riser Tubes |
Copper, Ø12.5 mm, 24 SWG |
Header Protective coating |
Polyurethane based coating |
Riser to Fin Joining |
Ultra Sonic Metal welding |
Collector Box |
Aluminum |
Protective coating on Collector Box |
Pure Polyester powder coated - Golden Yellow |
Glass retaining angle / Aluminum |
25mm Pure Polyester Powder coated - Black |
Collector back sheet |
Aluminum Screwed to the frame |
Back, Corner Sealing |
Non Acidic Silicon sealant through corners and screw joint |
Top Cover/Glazing |
Toughened glass, 4mm thick |
Glass Beading |
High quality EPDM Rubber - Single Piece |
Absorber Flanges |
4 mm Thick Machined brass flanges, 63 mm dia, 4 bolt holes |
Gaskets and Grommets |
High quality EPDM special shaped full Gaskets and Grommets |
Insulation Bottom |
Rock wool, 50 mm 48 kg/m³ density |
Insulation Side |
Rock wool, 25 mm 48 Kg/m³ density |
Reflective foil |
Aluminum 50 microns thick for bottom and 0.45 mm for sides |
Collector Supports |
Fabricated and Duly powder coated Mild Steel Sections |