Listing ID #4866058
Company Information
Ask for more detail from the seller
Contact SupplierA castellated nut, also called a castle nut or slotted nut, is a nut with slots (notches) cut into one end.The name comes from the nut’s resemblance to the crenellated parapet of a medieval castle.
The bolt or axle has one or two holes drilled through its threaded end. The nut is torqued properly and then, if the slot is not aligned with the hole in the fastener, the nut is rotated back to the nearest slot. The nut is then secured with a cotter pin or safety wire.
Castellated nuts are used in low-torque applications, such as holding a wheel bearing in place
Castle Nuts DimensionsSlotted Hex Castle Lock Nuts
Hex Castle Nuts - ANSI B18.2.2 - 1970
Nominal Size or Basic Major Thread Diameter |
F | G | H | T | S | R | W | Runout of Bearing Surface FIR |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Width Across Flats |
Width Across Corners |
Thickness | Unslotted Thickness and Flat Height |
Slot Width |
Fillet Radius |
Cylinder Diameter |
|||||||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | Nom | Max | Min | Max | Min | +.010 | Min | Max | ||
1/4 | .250 | 7/16 | .438 | .428 | .505 | .488 | 9/32 | .288 | .274 | 3/16 | .20 | .18 | .10 | .07 | .094 | .371 | .015 |
5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 21/64 | .336 | .320 | 15/64 | .24 | .22 | .12 | .09 | .064 | .425 | .016 |
3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 13/32 | .415 | .398 | 9/32 | .29 | .27 | .15 | .12 | .094 | .478 | .017 |
7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 29/64 | .463 | .444 | 19/64 | .31 | .29 | .15 | .12 | .094 | .582 | .018 |
1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 9/16 | .573 | .552 | 13/32 | .42 | .40 | .18 | .15 | .125 | .637 | .019 |
9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 39/64 | .621 | .598 | 27/64 | .43 | .41 | .18 | .15 | .156 | .744 | .020 |
5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 23/32 | .731 | .706 | 1/2 | .51 | .49 | .24 | .18 | .156 | .797 | .021 |
3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 13/16 | .827 | .798 | 9/16 | .57 | .55 | .24 | .18 | .188 | .941 | .023 |
7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 29/32 | .922 | .890 | 21/32 | .67 | .64 | .24 | .18 | .188 | 1.097 | .025 |
1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 1 | 1.018 | .982 | 23/32 | .73 | .70 | .30 | .24 | .188 | 1.254 | .027 |